Tribological behavior of sustainable carbon based composite coating for wear resistance applications

被引：6
|
作者：
Tyagi, Ankit [1 ]
Pandey, S. M. [1 ]
Gupta, Kalpna [1 ]
Walia, R. S. [1 ,3 ]
Murtaza, Qasim [1 ]
Krishen, Kumar [2 ]
机构：
[1] Delhi Technol Univ, Dept Mech Engn, Delhi 110042, India
[2] NASA, Johnson Space Ctr, Houston, TX USA
[3] Punjab Engn Coll, Dept Prod & Ind Engn, Chandigarh, India
来源：
MATERIALS RESEARCH EXPRESS | 2019年 / 6卷 / 12期
关键词：
carbon based composite coating; residual stress; micro-hardness; wear test; DIAMOND COATINGS; CYLINDER LINER; NI-P; TEMPERATURE; FRICTION; HVOF;
D O I：
10.1088/2053-1591/ab52b4
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The principal aim of the present study is to develop carbon based composite coating for wear resistance, having excellent tribological properties and enhanced mechanical properties using atmospheric plasma spray coating technique. FESEM, and HRXRD results confirms the presence of Cr3C2, MoO2 and Mo2C along with Cr2C2, hard phased in the carbon based composite coating. The carbon based composite coating was wear tested at variable temperature, the hardness and residual stress of the coating increases with increase in wear temperature, due to the formation of oxides and carbide in the coating. The experimental result shows that carbon based composite coating was temperature dependent and at 350 ;C temperature; lowest COF (0.08), wear (105 micron) and frictional force (3 N) was obtained.
引用
收藏
页数：8
相关论文
共 50 条
  • [1] Tribological behavior of HVOF carbon coating for wear resistance applications
    Tyagi, Ankit
    Walia, R. S.
    Murtaza, Qasim
    MATERIALS RESEARCH EXPRESS, 2019, 6 (12)
  • [2] Tribological behavior of HVOF based composite coatings for wear resistance applications
    Tyagi, Ankit
    Chourasia, Shubhangi
    Vats, Keshav
    Murtaza, Qasim
    Walia, R. S.
    Dhawan, Vikas
    MATERIALS TODAY-PROCEEDINGS, 2022, 50 : 2376 - 2380
  • [3] Tribological behavior of HVOF based composite coatings for wear resistance applications
    Tyagi, Ankit
    Chourasia, Shubhangi
    Vats, Keshav
    Murtaza, Qasim
    Walia, R. S.
    Dhawan, Vikas
    MATERIALS TODAY-PROCEEDINGS, 2022, 50 : 2376 - 2380
  • [4] Tribological wear behavior of diamond reinforced composite coating
    Venkateswarlu, K
    Ray, AK
    Gunjan, MK
    Mondal, DP
    Pathak, LC
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 418 (1-2): : 357 - 363
  • [5] Residual, Corrosion & Tribological Behavior of HVOF Sprayed Sustainable Temperature-Dependent Carbon-Based Hybrid Composite Coating
    Tyagi, Ankit
    Murtaza, Qasim
    Walia, Ravinderjit Singh
    STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2021, 67 (04): : 191 - 199
  • [6] The Influence of Carbon Nanotubes on the Tribological Behavior and Wear Resistance of a Polyamide Nanocomposite
    May, B.
    Hartwich, M. R.
    Stengler, R.
    Hu, X. G.
    ADVANCED TRIBOLOGY, 2009, : 515 - 515
  • [7] Morphology and wear behavior of Ni-carbon nanotube composite coating
    Chen, Xiao-Hua
    Li, De-Yi
    Li, Xue-Qian
    Zhang, Zhen-Hua
    Wang, Jian-Xiong
    Li, Wen-Zhu
    Mocaxue Xuebao/Tribology, 2002, 22 (01): : 6 - 9
  • [8] A critical review of diamond like carbon coating for wear resistance applications
    Tyagi, Ankit
    Walia, R. S.
    Murtaza, Qasim
    Pandey, Shailesh M.
    Tyagi, Pawan K.
    Bajaj, Bharat
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2019, 78 : 107 - 122
  • [9] Tribological behavior of carbon coating for piston ring applications using Taguchi approach
    Tyagi, Ankit
    Pandey, S. M.
    Murtaza, Qasim
    Walia, R. S.
    Tyagi, Mohit
    MATERIALS TODAY-PROCEEDINGS, 2020, 25 : 759 - 764
  • [10] Tribological behaviour of composite coatings for sliding wear resistance
    Chourasia, Shubhangi
    Sharma, Yash
    Tyagi, Ankit
    MATERIALS TODAY-PROCEEDINGS, 2022, 56 : 2123 - 2128
12345