Comprehensive tension setting optimisation technique for a cold rolled strip during continuous annealing

被引：9
作者：
Wang, R. [1 ]
Bai, Z. H. [1 ,2 ]
Du, J. C. [1 ]
Wang, Y. X. [1 ]
Cui, Y. Y. [1 ]
Guo, Z. S. [3 ]
Song, Z. F. [3 ]
机构：
[1] YanShan Univ, Natl Engn Res Ctr Equipment & Technol CSR, Qinhuangdao 066004, Peoples R China
[2] YanShan Univ, State Key Lab Metastable Mat Sci & Technol, Qinhuangdao, Peoples R China
[3] Guanzhou Ltd Share Ltd, Liaocheng, Peoples R China
来源：
IRONMAKING & STEELMAKING | 2018年 / 45卷 / 06期
关键词：
Continuous annealing; deviation; buckling; strip shape; tension optimisation;
D O I：
10.1080/03019233.2017.1292691
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The previous tension setting for the continuous annealing process (CAP) is not comprehensive; that is, it does not synthetically consider the factors of strip deviation, buckling, flatness and width narrowing. To address this issue, this study integrated the mechanical and technological characteristics of a continuous annealing line to present a comprehensive control index that can characterise the stability of a travelling strip. Meanwhile, strip deviation, buckling, strip shape and width narrowing were regarded as constraints in each process section. A comprehensive optimisation technique for the tension setting during CAP was then established, and a related theory was applied during production. In addition, a comprehensive tension setting optimisation software was developed for a cold rolled strip during continuous annealing, and the comprehensive optimisation of the tension parameters in each process section was realised. A practical implementation proves that the developed technique exhibits good application effects and considerable application values.
引用
收藏
页码：523 / 527
页数：5
相关论文
共 15 条
  • [1] Strip flatness modelling including buckling phenomena during thin strip cold rolling
    Abdelkhalek, S.
    Montmitonnet, P.
    Potier-Ferry, M.
    Zahrouni, H.
    Legrand, N.
    Buessler, P.
    [J]. IRONMAKING & STEELMAKING, 2010, 37 (04) : 290 - 297
  • [2] Modelling of strip buckling in the continuous annealing process
    Bai, Z. H.
    Wang, R.
    Du, J. C.
    Wang, Y. X.
    Liu, Y. X.
    Cui, Y. Y.
    Qian, C.
    Li, B. Y.
    [J]. IRONMAKING & STEELMAKING, 2017, 44 (10) : 782 - 788
  • [3] Online shape prediction and control technology of cold rolled strip during continuous annealing
    Bai, Z. H.
    Wang, R.
    Chen, S. Y.
    Chang, J. L.
    Qiao, X.
    Hou, B.
    [J]. IRONMAKING & STEELMAKING, 2015, 42 (10) : 791 - 796
  • [4] Bai ZH, 2016, IRON STEEL, V51, P64
  • [5] [白振华 Bai Zhenhua], 2016, [塑性工程学报, Journal of Plasticity Engineering], V23, P28
  • [6] Cao Q., 2015, THESIS
  • [7] [李会免 LI Huimian], 2010, [热加工工艺, Hot Working Technology], V39, P148
  • [8] Matoba T., 1994, IRON STEEL, V80, P61
  • [9] Model based scheduling of a continuous annealing furnace
    Sahay, S. S.
    Kapur, P. C.
    [J]. IRONMAKING & STEELMAKING, 2007, 34 (03) : 262 - 268
  • [10] Sasaki T., 1984, KAWASAKI STEEL TECH, V9, P36
12