Study on the effect of underwater shock wave and gas expansion in explosive forming

被引：0

作者：

Iyama, H

Hinata, T

Takahashi, K

Itoh, S

机构：

[1] Yatsushiro Natl Tech Coll, Kumamoto 8668501, Japan

[2] Kumamoto Univ, Shock Wave & Condensed Matter Res Ctr, Kumamoto 8608555, Japan

[3] Kumamoto Ind Res Inst, Kumamoto 8620901, Japan

来源：

EXPLOSION, SHOCK WAVE AND HYPERVELOCITY PHENOMENA IN MATERIALS | 2004年 / 465-466卷

关键词：

explosive forming; finite difference method; pressure vessel; underwater shock wave;

D O I：

10.4028/www.scientific.net/MSF.465-466.397

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Explosive forming is one of the unconventional techniques, in which, most commonly, water is used as the pressure transmission medium. The explosive is set at the top of the pressure vessel filled with water, and is detonated by an electric detonator. The underwater shock wave propagates through the water medium and impinges on the metal plate, which in turn, deforms. There is another pressure pulse acting on the metal plate as the secondary by product of the expansion of the gas generated by detonation of explosive. The secondary pressure pulse duration is longer and the peak pressure is lower than the primary shock pressure. However, the intensity of these pressure pulses is based also on the conditions of a pressure vessel. In order to understand the influence of the configuration of the pressure vessel on the deformation of a metal plate, numerical analysis was performed. This paper reports those results.

引用

页码：397 / 402

页数：6