Synthesis and characterization of TiC-reinforced iron-based composites Part II on mechanical characterization

被引：26

作者：

Bandyopadhyay, TK ^{[1
]}

Das, K ^{[1
]}

机构：

[1] Indian Inst Technol, Dept Met & Mat Engn, Kharagpur 721302, W Bengal, India

来源：

JOURNAL OF MATERIALS SCIENCE | 2004年 / 39卷 / 21期

关键词：

D O I：

10.1023/B:JMSC.0000044889.38392.1d

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The hardness, impact toughness and wear resistance properties of Fe-TiC composites, synthesized by aluminothermic reduction of an industrial waste, have been evaluated. The wear resistance property of the composites has been compared with some standard wear resistant materials. It has been found that the wear resistance property of the Fe-TiC composites with mostly pearlitic, fully pearlitic and pearlitic plus cementite type matrix with about 7 to 8 vol% TiC is better than that of a standard high chromium iron. The wear resistance property of ferritic and mostly ferritic type matrix with about 5 vol% TiC is better than that of a standard bearing steel. (C) 2004 Kluwer Academic Publishers.

引用

页码：6503 / 6508

页数：6

共 20 条

[1] CONTACT AND RUBBING OF FLAT SURFACES [J].

ARCHARD, JF .

JOURNAL OF APPLIED PHYSICS, 1953, 24 (08) :981-988

[2]

BANDYOPADHYAY PP, 2001, THESIS INDIAN I TECH

[3] Development of a cutting, tool from an industrial waste [J].

Das, K ;

Bandyopadhyay, TK ;

Ghosh, S ;

Chattopadhyay, AB .

MATERIALS AND MANUFACTURING PROCESSES, 2004, 19 (02) :313-328

[4] A Review on the various synthesis routes of TiC reinforced ferrous based composites [J].

Das, K ;

Bandyopadhyay, TK ;

Das, S .

JOURNAL OF MATERIALS SCIENCE, 2002, 37 (18) :3881-3892

[5]

DAS K, UNPUB

[6]

DAS K, IN PRESS J MAT SCI

[7] EFFECT OF CARBIDE ORIENTATION ON ABRASION OF HIGH CR WHITE CAST-IRON [J].

DOGAN, ON ;

HAWK, JA .

WEAR, 1995, 189 (1-2) :136-142

[8]

FRAGE N, 1996, SCRIPTA MATER, V35, P798

[9]

GELLER Y, 1978, TOOL STEELS, P186

[10] Behaviour of TiC-base cermets in different wear conditions [J].

Kübarsepp, J ;

Klaasen, H ;

Pirso, J .

WEAR, 2001, 249 (3-4) :229-234

← 1 2 →