Plunging method for Nd:YAG laser cladding with wire feeding

被引:79
作者
Kim, JD [1 ]
Peng, Y [1 ]
机构
[1] Inha Univ, Dept Mech Engn, Inchon 402751, South Korea
关键词
laser cladding; wire feeding; cladding speed; dilution; microstructure; hardness;
D O I
10.1016/S0143-8166(00)00046-4
中图分类号
O43 [光学];
学科分类号
070207 ; 0803 ;
摘要
The effects of wire feeding direction and position, cladding time, and cladding speed on the quality of cladding layer for laser cladding with win feeding are studied. Experiment results indicate that the wire feeding direction and position are important for wire laser cladding. By adopting the correct wire feeding direction and position, the wire can be plunged into the melt pool and can be melted by the heat of the molten metal. With the increase of cladding speed, the dilution of clad layer can be reduced and the growth of the grain size of heat-affected zone of the base metal can be limited. If proper cladding parameters are used, the clad layers will have a good surface shape, sound metallurgical bonding with base metal, low dilution, and the effect of heating on heat-affected zone metal can be limited. The hardness of the clad layer and heat-affected zone are checked. It indicates that with the increase of cladding speed, the hardness of the clad layer and heat-affected zone increases. (C) 2000 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:299 / 309
页数:11
相关论文
共 21 条
[1]   COMPARISON OF THE MICROSTRUCTURES AND ABRASIVE WEAR PROPERTIES OF STELLITE HARDFACING ALLOYS DEPOSITED BY ARC-WELDING AND LASER CLADDING [J].
ATAMERT, S ;
BHADESHIA, HKDH .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1989, 20 (06) :1037-1054
[2]  
BREINAN EM, 1983, RAPID SOLIDIFICATION
[3]  
Damborenea J. J., 1993, Processing of Advanced Materials, V3, P107
[4]  
DENNEY PE, 1998, IND LASER REV, P19
[5]   AUSTENITIC STAINLESS-STEELS LAYERS DEPOSITED BY LASER CLADDING ON A MILD-STEEL - REALIZATION AND CHARACTERIZATION [J].
FOUQUET, F ;
SALLAMAND, P ;
MILLET, JP ;
FRENK, A ;
WAGNIERE, JD .
JOURNAL DE PHYSIQUE IV, 1994, 4 (C4) :89-92
[6]  
FUX V, 1993, C SURF ENG BREM GERM, P449
[7]  
HINSESTERN A, 1992, ECLAT 92 GOTT GERM 1, P223
[8]  
HIROSE A, 1992, J IRON STEEL I JPN, V78, P1585
[9]  
KOSHY P, 1985, C APPL HIGH POW LAS, P80
[10]  
LI LJ, 1985, C LAS PROC MAT LOS A