Study on borehole temperature distribution when the well-kick and the well-leakage occurs simultaneously during geothermal well drilling

被引:6
|
作者
Zhang, Zheng [1 ]
Wang, Xin [1 ]
Xiong, Youming [1 ]
Peng, Geng [6 ]
Wang, Guorong [1 ,3 ,4 ,5 ]
Lu, Jingsheng [2 ]
Zhong, Lin [4 ,5 ]
Wang, Jingpeng [1 ,7 ]
Yan, Zhiyin [8 ]
Wei, Ruihua [9 ]
机构
[1] Southwest Petr Univ, State Key Lab Oil & Gas Reservoir Geol, Exploitat, Chengdu 610500, Sichuan, Peoples R China
[2] Chinese Acad Sci, Guangzhou Inst Energy Convers, Key Lab Gas Hydrate, Guangzhou 510640, Peoples R China
[3] Southwest Petr Univ, Energy Equipment Res Inst, Chengdu 610500, Peoples R China
[4] Southwest Petr Univ, Sch Mechatron Engn, Chengdu 610500, Peoples R China
[5] Southern Marine Sci & Engn Guangdong Lab, Zhanjiang 524000, Peoples R China
[6] Petrochina Southwest Oil & Gas Field Co, Engn Technol Res Inst, Chengdu 610031, Sichuan, Peoples R China
[7] Xinjiang Oil Field Co, Engn & Technol Res Inst, Karamay 834000, Peoples R China
[8] PetroChina Southwest Oil & Gasfield Co, Nat Gas Purificat Plant Gen, Chongqing 400021, Peoples R China
[9] Xinjiang Oilfield Co, Explorat Div, Karamay 834000, Peoples R China
关键词
Drilling; Well-kick; Well-leakage; Well temperature; SHUT-IN; CIRCULATION;
D O I
10.1016/j.geothermics.2022.102441
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
When the well-leakage or the well-kick occurs during drilling geothermal wells, the borehole temperature is redistributed. It causes the rheology and density of the mud to change, which in turn affects the borehole pressure control, borehole stability and cementing quality. In order to understand the distribution law of borehole temperature under complex working conditions in geothermal well drilling, this paper establishes a borehole temperature distribution model when well-leakage and well-kick occur simultaneously. The borehole temperature distribution law when well-leakage and well-kick occur simultaneously is obtained. When both the well-kick and the well-leakage exist in the drilling process, the temperature of the borehole and the formation fluctuates near the location where the well-kick and well-leakage occurs. Under the ordinary cycle condition, the highest temperature of annular drilling fluid is located at 5325 m; When the well-leakage occurs at the bot-tomhole and the well-kick occurs at a specific location in the borehole, the highest temperature of annular drilling fluid is at 5250 m; When the well-kick takes place at the bottomhole and the well-leakage occurs at a specific location in the borehole, the highest temperature of annular drilling fluid at 5286 m place. Compared with the ordinary cycle condition, when the well-leakage occurs at the bottom of the well and the well-kick occurs at a specific location in the borehole, the bottomhole mud temperature decreases after the same cycle time. And the temperature of the mud and the formations increases significantly near and above the position where the well-kick takes place. When the well-kick takes place at the bottom of the well, and the well-leakage occurs at a specific location in the borehole, compared with the ordinary cycle condition, the temperature of the bottom hole mud increases after the same cycle time and the mud temperature increases rather than decreases at the well-leakage location. Compared with other situations, it is found that when the well-kick occurs at the bottomhole, it has a more significant impact on the temperature distribution of the entire borehole.
引用
收藏
页数:14
相关论文
共 50 条
  • [41] Effect of P-ρ-T behavior of muds on loss/gain during high-temperature deep-well drilling
    Babu, DR
    JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING, 1998, 20 (1-2) : 49 - 62
  • [42] Automated Gas Influx Handling Model and Mechanisms During Deep High-Temperature and High-Pressure Well Drilling
    Zang, Yanbin
    Zhang, Wenping
    Xu, Zhengming
    Lu, Jiayi
    Deng, Zhilu
    PROCESSES, 2024, 12 (11)
  • [43] Study on the coupling model of wellbore temperature and pressure during the production of high temperature and high pressure gas well
    Liu, Xiangkang
    Liu, Liming
    Yu, Zhaocai
    Zhang, Lin
    Zhou, Lang
    Zhang, Zheng
    Guo, Fang
    ENERGY REPORTS, 2022, 8 : 1249 - 1257
  • [44] A Numerical Investigation on Kick Control with the Displacement Kill Method during a Well Test in a Deep-Water Gas Reservoir: A Case Study
    Li, Qingchao
    Li, Qiang
    Han, Ying
    PROCESSES, 2024, 12 (10)
  • [45] Automatic risk uncertainty estimation to support decision making during drilling operation planning: Case study on an ERD well
    Cayeux, Eric (Eric.Cayeux@iris.no), 1600, Urban Verlag Hamburg/Wien GmbH (43):
  • [46] Automatic Risk Uncertainty Estimation to Support Decision Making during Drilling Operation Planning: Case Study on an ERD Well
    Cayeux, E.
    OIL GAS-EUROPEAN MAGAZINE, 2017, 43 (01): : OG26 - OG28
  • [47] Experimental study on the sliding friction of cuttings bed and pipe during horizontal-well drilling considering pipe rotation
    Song, Xianzhi
    Xiao, Hao
    Yang, Henglin
    Wang, Huanhao
    Zhou, Mengmeng
    Xu, Zhengming
    Zhu, Zhaopeng
    Li, Baoyu
    Jing, Silin
    POWDER TECHNOLOGY, 2024, 436
  • [48] TEMPERATURE DISTRIBUTION AROUND A WELL DURING THERMAL INJECTION AND A GRAPHICAL TECHNIQUE FOR EVALUATING AQUIFER THERMAL-PROPERTIES
    CHEN, CS
    REDDELL, DL
    WATER RESOURCES RESEARCH, 1983, 19 (02) : 351 - 363
  • [49] Temperature Transients Affect Reservoir-Pressure Estimation During Well Tests: Case Study and Model
    Maizeret, Pierre-David
    Sidorova, Maria
    Lipovetsky, Tatiana
    SPE RESERVOIR EVALUATION & ENGINEERING, 2018, 21 (01) : 31 - 38
  • [50] USE OF HOSTADRILL-2825 REAGENT DURING DEEP WELL-DRILLING UNDER HIGH BOTTOM-HOLE TEMPERATURE AND POLYMINERAL ATTACK
    LIPKES, MI
    TARKHANOV, YI
    GANKIN, VE
    DENISOVA, LP
    BRINTSEV, AI
    NEFTYANOE KHOZYAISTVO, 1992, (09): : 39 - 41