A Novel Method for automatic detection of incipient micropitting in ground surfaces

被引:7
作者
Britton, W. M. [1 ]
Clarke, A. [1 ]
Evans, H. P. [1 ]
机构
[1] Cardiff Univ, Sch Engn, Cardiff, Wales
基金
英国工程与自然科学研究理事会;
关键词
Micropitting; Mixed lubrication; Surface roughness; RUNNING-IN; FATIGUE; STEEL; ROUGHNESS; EVOLUTION; CONTACTS;
D O I
10.1016/j.triboint.2021.106959
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Micropitting is a surface fatigue phenomenon, on the scale of the surface roughness, which can be a significant problem in heavily loaded mixed lubrication contacts in power transmission gearing. Modern surface profilometry equipment allows detailed areal measurements of micropitted surfaces to be obtained. However, the processing of these surfaces to determine the extent of micropitting is difficult and often involves manual or semimanual evaluation. This paper presents a new algorithm to allow the automated detection of micropits in areal surface measurements of ground surfaces, and its effectiveness is demonstrated by examination of measurements taken from a test where the early stages of micropitting developed. Comparison with previous methods for evaluating the amount of micropitting based on linear surface profiles clearly illustrates the truly threedimensional nature of incipient micropitting.
引用
收藏
页数:13
相关论文
共 19 条
[1]   Experimental and Numerical Study of Micropitting Initiation in Real Rough Surfaces in a Micro-elastohydrodynamic Lubrication Regime [J].
AL-Mayali, M. F. ;
Hutt, S. ;
Sharif, K. J. ;
Clarke, A. ;
Evans, H. P. .
TRIBOLOGY LETTERS, 2018, 66 (04)
[2]   Experimental and analytical study of gear micropitting initiation and propagation under varying loading conditions [J].
Al-Tubi, I. S. ;
Long, H. ;
Zhang, J. ;
Shaw, B. .
WEAR, 2015, 328 :8-16
[3]   Micropitting Performance of Oil Additives in Lubricated Rolling Contacts [J].
Brizmer, V. ;
Pasaribu, H. R. ;
Morales-Espejel, G. E. .
TRIBOLOGY TRANSACTIONS, 2013, 56 (05) :739-748
[4]   Running-in and micropitting behaviour of steel surfaces under mixed lubrication conditions [J].
Clarke, A. ;
Weeks, I. J. J. ;
Snidle, R. W. ;
Evans, H. P. .
TRIBOLOGY INTERNATIONAL, 2016, 101 :59-68
[5]   Understanding micropitting in gears [J].
Clarke, A. ;
Evans, H. P. ;
Snidle, R. W. .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2016, 230 (7-8) :1276-1289
[6]   Generation of Acoustic Emission from the running-in and subsequent micropitting of a mixed-elastohydrodynamic contact [J].
Hutt, S. ;
Clarke, A. ;
Evans, H. P. .
TRIBOLOGY INTERNATIONAL, 2018, 119 :270-280
[7]  
Kadiric A., 2016, AGMA Technical Paper 16FTM21.
[8]   Detection of gear pitting failure progression with on-line particle monitoring [J].
Kattelus, J. ;
Miettinen, J. ;
Lehtovaara, A. .
TRIBOLOGY INTERNATIONAL, 2018, 118 :458-464
[9]   Effect of lubricants on micropitting and wear [J].
Laine, E. ;
Olver, A. V. ;
Beveridge, T. A. .
TRIBOLOGY INTERNATIONAL, 2008, 41 (11) :1049-1055
[10]   Micro-pitting fatigue lives of lubricated point contacts: Experiments and model validation [J].
Li, Sheng ;
Kahraman, Ahmet .
INTERNATIONAL JOURNAL OF FATIGUE, 2013, 48 :9-18