The effect of external load on internal relative humidity in concrete

被引:54
作者
Wyrzykowski, Mateusz [1 ,2 ]
Lura, Pietro [1 ,3 ]
机构
[1] Empa, Swiss Fed Labs Mat Sci & Technol, Concrete Construct Chem Lab, CH-8600 Dubendorf, Switzerland
[2] Lodz Univ Technol, Dept Bldg Phys & Bldg Mat, Lodz, Poland
[3] Swiss Fed Inst Technol, Inst Bldg Mat, Zurich, Switzerland
关键词
Humidity; Microstructure; Creep; Elastic moduli; Hygro-mechanical coupling; HARDENED CEMENT PASTE; THERMAL-EXPANSION; EARLY AGES; CREEP; SHRINKAGE; MODULUS; PERFORMANCE; COUPLINGS; MODEL;
D O I
10.1016/j.cemconres.2014.07.011
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
In poromechanical modeling of unsaturated concrete, the effect of external load on internal relative humidity (RH) is usually neglected. In this study we present experimental measurements of RH changes in a low w/c mortar during uniaxial compressive loading. We observed an instantaneous RH increase of almost 2% RH inside sealed mortar samples at loading with a stress/strength ratio of 30%. The initial RH increase is further recovered over time while the sample is under constant load. Upon unloading, an instantaneous RH decrease of roughly the same magnitude takes place. These results confirm that the hygro-mechanical coupling is relevant for understanding concrete deformations, both quasi-immediate and possibly also volumetric creep and drying creep. The observed coupling supports the theory of local water redistribution from load-bearing water layers in hindered adsorption areas toward larger pores as a result of applied compressive stress. (C) 2014 Elsevier Ltd. All rights reserved.
引用
收藏
页码:58 / 63
页数:6
相关论文
共 49 条