Characteristics of nano/ultrafine-grained austenitic TRIP steel fabricated by accumulative roll bonding and subsequent annealing

被引：53
作者：
Jafarian, Hamidreza [1 ]
机构：
[1] Iran Univ Sci & Technol, Sch Met & Mat Engn, Tehran, Iran
来源：
MATERIALS CHARACTERIZATION | 2016年 / 114卷
关键词：
Ultrafine grain austenite; Transformation induced plasticity (TRIP); Accumulative roll bonding (ARB); Microstructure; Deformation-induced martensite transformation; Luders band; Tensile behavior; BULK NANOSTRUCTURED MATERIALS; SEVERE PLASTIC-DEFORMATION; MECHANICAL-PROPERTIES; MICROSTRUCTURE EVOLUTION; STAINLESS-STEEL; ARB PROCESS; METALS; DUCTILITY; ALLOYS; TRANSFORMATION;
D O I：
10.1016/j.matchar.2016.02.012
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this paper, microstructure and mechanical properties of nano/ultrafine-grained (UFG) austenitic Fe-24Ni-0.3C steel fabricated by accumulative roll bonding (ARB) and subsequent annealing were studied. The results indicated that after 6 cycles of the ARB process, elongated UFG austenite with mean grain size of about 300 nm was obtained. Annealing treatment of 6-cycle ARB processed austenite at temperatures between 773 and 873 K resulted in formation of partly and fully recrystallized austenites with mean grain sizes between 750 nm to 2.5 mu m. Discontinuous yielding accommodated with Luders band deformation was observed in the stress strain curves of the ARB processed specimens. Microstructural observation indicated that the Udders band propagation corresponding to the propagation of the region where deformation-induced martensitic transformation occurred. It was found that deformation-induced martensitic transformation provided extra strain hardening ability, resulting in significant enhancement of uniform elongation in UFG metastable austenitic steel having ultrahigh strength and considerable uniform elongation. (C) 2016 Elsevier Inc. All rights reserved.
引用
收藏
页码：88 / 96
页数：9
相关论文
共 40 条
[21]   TRANSFORMATION BEHAVIOR OF TRIP STEELS [J].
OLSON, GB ;
AZRIN, M .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1978, 9 (05) :713-721
[22]   Microstructural evolution over a large strain range in aluminium deformed by cyclic-extrusion-compression [J].
Richert, M ;
Liu, Q ;
Hansen, N .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1999, 260 (1-2) :275-283
[23]   Novel ultra-high straining process for bulk materials - Development of the accumulative roll-bonding (ARB) process [J].
Saito, Y ;
Utsunomiya, H ;
Tsuji, N ;
Sakai, T .
ACTA MATERIALIA, 1999, 47 (02) :579-583
[24]   Nano/ultrafine grained austenitic stainless steel through the formation and reversion of deformation-induced martensite: Mechanisms, microstructures, mechanical properties, and TRIP effect [J].
Shirdel, M. ;
Mirzadeh, H. ;
Parsa, M. H. .
MATERIALS CHARACTERIZATION, 2015, 103 :150-161
[25]   Transformation-induced plasticity in an ultrafine-grained steel:: An in situ neutron diffraction study [J].
Tao, Kaixiang ;
Choo, Hahn ;
Li, Hongqi ;
Clausen, Bjorn ;
Jin, Jae-Eun ;
Lee, Young-Kook .
APPLIED PHYSICS LETTERS, 2007, 90 (10)
[26]   ARB (accumulative roll-bonding) and other new techniques to produce bulk ultrafine grained materials [J].
Tsuji, N ;
Saito, Y ;
Lee, SH ;
Minamino, Y .
ADVANCED ENGINEERING MATERIALS, 2003, 5 (05) :338-344
[27]   Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing [J].
Tsuji, N ;
Ito, Y ;
Saito, Y ;
Minamino, Y .
SCRIPTA MATERIALIA, 2002, 47 (12) :893-899
[28]   Ultra-fine grained bulk steel produced by accumulative roll-bonding (ARB) process [J].
Tsuji, N ;
Saito, Y ;
Utsunomiya, H ;
Tanigawa, S .
SCRIPTA MATERIALIA, 1999, 40 (07) :795-800
[29]  
Tsuji N, 2007, J NANOSCI NANOTECHNO, V7, P3765, DOI 10.1166/jnn.2007.025
[30]   The innovation potential of bulk nanostructured materials [J].
Valiev, Ruslan Z. ;
Zehetbauer, Michael J. ;
Estrin, Yuri ;
Hoeppel, Heinz Werner ;
Ivanisenko, Yulia ;
Hahn, Horst ;
Wilde, Gerhard ;
Roven, Hans J. ;
Sauvage, Xavier ;
Langdon, Terence G. .
ADVANCED ENGINEERING MATERIALS, 2007, 9 (07) :527-533
1234