Characteristics of nano/ultrafine-grained austenitic TRIP steel fabricated by accumulative roll bonding and subsequent annealing

被引：53
作者：
Jafarian, Hamidreza [1 ]
机构：
[1] Iran Univ Sci & Technol, Sch Met & Mat Engn, Tehran, Iran
来源：
MATERIALS CHARACTERIZATION | 2016年 / 114卷
关键词：
Ultrafine grain austenite; Transformation induced plasticity (TRIP); Accumulative roll bonding (ARB); Microstructure; Deformation-induced martensite transformation; Luders band; Tensile behavior; BULK NANOSTRUCTURED MATERIALS; SEVERE PLASTIC-DEFORMATION; MECHANICAL-PROPERTIES; MICROSTRUCTURE EVOLUTION; STAINLESS-STEEL; ARB PROCESS; METALS; DUCTILITY; ALLOYS; TRANSFORMATION;
D O I：
10.1016/j.matchar.2016.02.012
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this paper, microstructure and mechanical properties of nano/ultrafine-grained (UFG) austenitic Fe-24Ni-0.3C steel fabricated by accumulative roll bonding (ARB) and subsequent annealing were studied. The results indicated that after 6 cycles of the ARB process, elongated UFG austenite with mean grain size of about 300 nm was obtained. Annealing treatment of 6-cycle ARB processed austenite at temperatures between 773 and 873 K resulted in formation of partly and fully recrystallized austenites with mean grain sizes between 750 nm to 2.5 mu m. Discontinuous yielding accommodated with Luders band deformation was observed in the stress strain curves of the ARB processed specimens. Microstructural observation indicated that the Udders band propagation corresponding to the propagation of the region where deformation-induced martensitic transformation occurred. It was found that deformation-induced martensitic transformation provided extra strain hardening ability, resulting in significant enhancement of uniform elongation in UFG metastable austenitic steel having ultrahigh strength and considerable uniform elongation. (C) 2016 Elsevier Inc. All rights reserved.
引用
收藏
页码：88 / 96
页数：9
相关论文
共 40 条
[11]   Principle of equal-channel angular pressing for the processing of ultra-fine grained materials [J].
Iwahashi, Y ;
Wang, JT ;
Horita, Z ;
Nemoto, M ;
Langdon, TG .
SCRIPTA MATERIALIA, 1996, 35 (02) :143-146
[12]   Microstructure evolution and mechanical properties in ultrafine grained Al/TiC composite fabricated by accumulative roll bonding [J].
Jafarian, Hamidreza ;
Habibi-Livar, Jafar ;
Razavi, Seyed Hossein .
COMPOSITES PART B-ENGINEERING, 2015, 77 :84-92
[13]   Texture development and microstructure evolution in metastable austenitic steel processed by accumulative roll bonding and subsequent annealing [J].
Jafarian, Hamidreza ;
Eivani, Alireza .
JOURNAL OF MATERIALS SCIENCE, 2014, 49 (19) :6570-6578
[14]   Variant selection of martensite transformation from ultrafine-grained austenite in Fe-Ni-C alloy [J].
Jafarian, Hamidreza ;
Borhani, Ehsan ;
Shibata, Akinobu ;
Tsuji, Nobuhiro .
JOURNAL OF ALLOYS AND COMPOUNDS, 2013, 577 :S668-S672
[15]   The influence of grain size on the strain-induced martensite formation in tensile straining of an austenitic 15Cr-9Mn-Ni-Cu stainless steel [J].
Kisko, A. ;
Misra, R. D. K. ;
Talonen, J. ;
Karjalainen, L. P. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 578 :408-416
[16]   Optimization of strength and ductility in nanocrystalline and ultrafine grained metals [J].
Koch, CC .
SCRIPTA MATERIALIA, 2003, 49 (07) :657-662
[17]   Twenty-five years of ultrafine-grained materials: Achieving exceptional properties through grain refinement [J].
Langdon, Terence G. .
ACTA MATERIALIA, 2013, 61 (19) :7035-7059
[18]   Instabilities and ductility of nanocrystalline and ultrafine-grained metals [J].
Ma, E .
SCRIPTA MATERIALIA, 2003, 49 (07) :663-668
[19]   A repetitive thermomechanical process to produce nano-crystalline in a metastable austenitic steel [J].
Ma, YQ ;
Jin, JE ;
Lee, YK .
SCRIPTA MATERIALIA, 2005, 52 (12) :1311-1315
[20]   STRESS-ASSISTED AND STRAIN-INDUCED MARTENSITES IN FE-NL-C ALLOYS [J].
MAXWELL, PC ;
GOLDBERG, A ;
SHYNE, JC .
METALLURGICAL TRANSACTIONS, 1974, 5 (06) :1305-1318
1234