Analog baseband channel for GSM/UMTS/WLAN/Bluetooth reconfigurable multistandard terminals

被引：0

作者：

Ghittori, Nicola ^{[1
]}

Vigna, Andrea ^{[1
]}

Malcovati, Piero ^{[2
]}

D'Amico, Stefano ^{[3
]}

Baschirotto, Andrea ^{[3
]}

机构：

[1] Univ Pavia, Dept Elect, Via Palestro 3, I-27100 Pavia, Italy

[2] Univ Pavia, Dept Elect Engn, I-27100 Pavia, Italy

[3] Univ Lecce, Dept Innovat Engn, I-73100 Lecce, Italy

来源：

2006 IEEE INTERNATIONAL SYMPOSIUM ON CIRCUITS AND SYSTEMS, VOLS 1-11, PROCEEDINGS | 2006年

关键词：

D O I：

暂无

中图分类号：

TP3 [计算技术、计算机技术];

学科分类号：

0812 ;

摘要：

This paper presents a reconfigurable analog baseband channel for multistandard receivers. The circuit, consisting of two variable gain amplifiers and a low-pass filter, fulfills the requirements of GSM, WCDMA (UNITS), WLAN (IEEE 802.11a/b/g), and Bluetooth. The gain, bandwidth and power consumption of the circuit are changed through a digital control word depending on the selected standard. Simulation results, including all of the tests prescribed by the different standards, confirm the validity of the proposed solution. The in-band IIP3 evaluated with maximum gain (68dB/39dB) is 5dBm/1dBm for UMTS/WLAN respectively, while the power consumption is 51.7mW/55mW in the two cases.

引用

页码：4301 / +

页数：2

共 4 条

[1]

Bouras I, 2003, ISSCC DIG TECH PAP I, V46, P352

[2] A 1.2V-21dBm OIP3 4th-order active-gm-RC reconfigurable (UMTS/WLAN) filter with on-chip tuning designed with an automatic tool [J].

D'Amico, S ;

Giannini, V ;

Baschirotto, A .

ESSCIRC 2005: PROCEEDINGS OF THE 31ST EUROPEAN SOLID-STATE CIRCUITS CONFERENCE, 2005, :315-318

[3] A four-channel ADSL2+ analog front-end for CO applications with 75 mW per channel, built in 0.13-μm CMOS [J].

Pessl, P ;

Gaggl, R ;

Hohl, J ;

Giotta, D ;

Hauptmann, J .

IEEE JOURNAL OF SOLID-STATE CIRCUITS, 2004, 39 (12) :2371-2378

[4]

Rogin J, 2003, ISSCC DIG TECH PAP I, V46, P268

← 1 →