Profiles of water content, water activity and texture in crusted dry-cured loin and in non-crusted dry-cured loin

This study compares the profiles of water activity (a(w)), water content (X) and texture in loin with crusted surface versus those profiles in loin without crust, and establishes a mathematical model able to describe hardness based on a(w) and/or X. Two loins (m. longissimus dorsi) were dry-cured, aged and then each one was divided into four pieces. Two of them were dried at 15 +/- 2 degreesC, 50 +/- 3% RH (CL treatment) and the other two were dried at 2 +/- 2 degreesC, 80 +/- 3% RH (NCL treatment). The pieces of CL were dried under more severe conditions in order to develop a crust on the surface. Three-millimetre thick slices were taken from the most external part towards the inner part. The slices were prepared (10 x 10 x 3 mm) for texture profile analysis (TPA). Measurements of aw and X were carried out on each slice. Variance analyses and non-linear regression analyses were performed to create a model for loin hardness prediction through X and/or a(w) and a linear regression model for cohesiveness and springiness. CL loins showed a higher hardness and chewiness and lower cohesiveness at the surface (3-mm thickness) than the NCL loins. Hardness and chewiness, fitted with a non-linear model, were better described by X than by a(w). Springiness showed a low relationship with X and a(w). The on-line monitoring of X and a(w) at the surface of the product would enable an estimation of the profiles of water content, aw and texture and it could be, therefore, a useful tool to avoid crusting. (C) 2004 Elsevier Ltd. All rights reserved.