Phase-field simulation of competitive growth of grains in a binary alloy during directional solidification

被引:4
作者
Feng, Li [1 ,2 ]
Gao, Ya-long [1 ]
Lu, Ni-ni [1 ]
Zhu, Chang-sheng [2 ]
An, Guo-sheng [1 ,2 ]
Zhong, Jun-he [1 ]
机构
[1] Lanzhou Univ Technol, Coll Mat & Engn, Lanzhou 730050, Gansu, Peoples R China
[2] Lanzhou Univ Technol, State Key Lab Adv Proc & Recycling Nonferrous Met, Lanzhou 730050, Gansu, Peoples R China
基金
中国国家自然科学基金;
关键词
phase-field method; binary alloy; directional solidification; different planes; competitive growth; MICROSTRUCTURE FORMATION;
D O I
10.1007/s41230-018-8020-7
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
Taking Al-2%mole-Cu binary alloy as an example, the influence of grain orientation on competitive growth of dendrites under different competitive modes was investigated by using the three-dimensional (3-D) phase-field method. The result of phase-field simulation was verified by applying cold spray and directional remelting. In the simulation process, two competitive modes were designed: in Scheme 1, the monolayer columnar grains in multilayer columnar crystals had different orientations; while in Scheme 2, they had the same orientation. The simulation result showed that in Scheme 1, the growth of the dendrites, whose orientation had a certain included angle with the direction of temperature gradient, was restrained by the growth of other dendrites whose direction was parallel to the direction of temperature gradient. Moreover, the larger the included angle between the grain orientation and temperature gradient, the earlier the cessation of dendrite growth. The secondary dendrites of dendrites whose grain orientation was parallel to the temperature gradient flourished with increasing included angles between the grain orientation and temperature gradient. In Scheme 2, the greater the included angle between grain orientation and temperature gradient, the easier the dendrites whose orientation showed a certain included angle with temperature gradient inserted between those grew parallel to the temperature gradient, and the better the growth condition thereafter. Some growing dendrites after intercalation were deflected to the temperature gradient, and the greater the included angle, the lower the deflection. The morphologies of the competitive growth dendrites obtained through simulation can also be found in metallographs of practical solidification experiments. This implies that the two modes of competitive growth of dendrites characterized in the simulation do exist and frequently appear in practical solidification processes.
引用
收藏
页码:333 / 342
页数:10
相关论文
共 24 条
[1]  
[崔联合 Cui Lianhe], 2011, [热加工工艺, Hot Working Technology], V40, P34
[2]   Phase-field numerical simulation of three-dimensional competitive growth of dendrites in a binary alloy [J].
Feng, Li ;
Gao, Ya-long ;
Zhu, Chang-sheng ;
An, Guo-sheng ;
Deng, Xin ;
Jia, Bei-bei .
CHINA FOUNDRY, 2018, 15 (01) :44-50
[3]  
Feng Li, 2016, Journal of Lanzhou University of Technology, V42, P11
[4]  
Fu H., 2008, DIRECTIONAL SOLIDIFI
[5]   A COUPLED FINITE-ELEMENT CELLULAR-AUTOMATON MODEL FOR THE PREDICTION OF DENDRITIC GRAIN STRUCTURES IN SOLIDIFICATION PROCESSES [J].
GANDIN, CA ;
RAPPAZ, M .
ACTA METALLURGICA ET MATERIALIA, 1994, 42 (07) :2233-2246
[6]  
Hu Hanqi, 1991, FUNDAMENTALS METAL S
[7]   Research on phase-field model of three-dimensional dendritic growth for binary alloy [J].
Feng, Li ;
Jia, Jinfang ;
Zhu, Changsheng ;
Lu, Yang ;
Xiao, Rongzhen ;
Wang, Zhiping .
Journal of Computational and Theoretical Nanoscience, 2015, 12 (11) :4289-4296
[8]   Phase-field modeling of microstructure formation during rapid solidification in Inconel 718 superalloy [J].
Kundin, Julia ;
Mushongera, Leslie ;
Emmerich, Heike .
ACTA MATERIALIA, 2015, 95 :343-356
[9]  
Li Linxu, 2008, FOUNDRY TECHNOL, V29, P891
[10]  
[李勇 Li Yong], 2014, [材料导报, Materials Review], V28, P108