Influence of process parameters on microwave joining of the similar/dissimilar materials: A review

被引:3
|
作者
Thakur, Ankush [1 ]
Bedi, Raman [1 ]
机构
[1] Dr BR Ambedkar Natl Inst Technol, Mech Engn Dept, Jalandhar 144011, India
关键词
Bulk metal; Exposure time; Interface material; Microwave joining; Power input; EXPOSURE TIME; INCONEL-625; ALLOY; OPPORTUNITIES; STRENGTH; SIZE;
D O I
10.1016/j.matpr.2022.03.428
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Conventional joining techniques like soldering, welding, and brazing are used by various fabrication industries but these processes have some limitations like more power consumption, higher processing time, and greater heat-affected zone. The need of the hour is to find alternate welding techniques that can be more environment-friendly, cost-effective, and enhance the properties of the fabricated product. Microwave welding is one such joining technique that overcome all the limitations allied with conven-tional joining techniques. Microwaves are generally electromagnetic waves having a wavelength range from 1 mm to 1 m and a frequency range from 0.3 to 300 GHz. Due to volumetric heating in microwave joining, the rapid joining of specimens occurred. Limited studies are available regarding the use of micro-waves in joining. Various parameters that influence the microwave joining of materials are the type of interface material, exposure time, susceptor material, and power output. The present study critically reviews and summarizes the available literature on the effect of above said parameters on the microwave joining of materials. Research gaps reported in the literature have also been discussed in an attempt to create a single-valued source of knowledge that will help and guide researchers working in the area of microwave joining of materials.Copyright (c) 2022 Elsevier Ltd. All rights reserved.Selection and peer-review under responsibility of the scientific committee of the International Confer-ence on Materials, Processing & Characterization.
引用
收藏
页码:3139 / 3147
页数:9
相关论文
共 50 条
  • [1] Microwave joining of similar/dissimilar metals and its characterizations: A review
    Samyal, Rahul
    Bagha, Ashok Kumar
    Bedi, Raman
    MATERIALS TODAY-PROCEEDINGS, 2020, 26 : 423 - 433
  • [2] Joining of Similar and Dissimilar Metals Through Microwave Hybrid Heating & Its Characterization: A Review
    Koujalagi, B. G.
    Gadagi, Amith
    Adake, C., V
    Katti, Ramesh
    RECENT ADVANCES IN SMART MANUFACTURING AND MATERIALS, ICEM 2020, 2021, : 13 - 22
  • [3] A review on heating mechanism, materials and heating parameters of microwave hybrid heated joining technique
    Zhang, Shuai
    Qiu, Qingyang
    Zeng, Chen
    Paik, Kyung-Wook
    He, Peng
    Zhang, Shuye
    JOURNAL OF MANUFACTURING PROCESSES, 2024, 116 : 176 - 191
  • [4] Optimizing FSW process parameters using RSM and regression analysis for similar and dissimilar aluminium materials
    Suhin, S.
    Divahar, S. Robin
    Dhas, J. Edwin Raja
    Lewise, K. Anton Savio
    Gupta, M. Satyanarayana
    MATERIALS TODAY-PROCEEDINGS, 2022, 64 : 368 - 373
  • [5] Refill friction stir spot welding (RFSSW): a review of processing, similar/dissimilar materials joining, mechanical properties and fracture mechanism
    Zhao, Yun-qiang
    Yang, Hao-kun
    Andriia, Aloshyn
    Lo, Hong-hang
    Li, Jia-xin
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2024, 31 (08) : 1825 - 1839
  • [6] Microwave joining of copper pipes using selective microwave hybrid heating process: Simulation and experimental study
    Thakur, Ankush
    Bedi, Raman
    MATERIALS TODAY COMMUNICATIONS, 2024, 38
  • [7] Review of joining inconel alloys through microwave hybrid heating and other techniques
    Handa, Vipin
    Goyal, Parveen
    Sehgal, Shankar
    MATERIALS TODAY-PROCEEDINGS, 2020, 28 : 1355 - 1358
  • [8] Laser Lap Joining of Dissimilar Materials: A Review of Factors Affecting Joint Strength
    Tamrin, K. F.
    Nukman, Y.
    Zakariyah, S. S.
    MATERIALS AND MANUFACTURING PROCESSES, 2013, 28 (08) : 857 - 871
  • [9] Friction Stir Welding for Joining of Dissimilar Materials
    Sahu, Suryakanta
    Mypati, Omkar
    Nayak, Soumya Sangita
    Sarkar, Pooja
    Pal, Surjya Kanta
    Singh, Shiv Brat
    ADVANCES IN ADDITIVE MANUFACTURING AND JOINING, AIMTDR 2018, 2020, : 699 - 709
  • [10] Two-sided friction stir riveting by extrusion: A process for joining dissimilar materials
    Evans, William T.
    Cox, Chase
    Gibson, Brian T.
    Strauss, Alvin M.
    Cook, George E.
    JOURNAL OF MANUFACTURING PROCESSES, 2016, 23 : 115 - 121