Optimization of Slag Mobility of Biomass Fuels in a Pilot-scale Entrained-Flow Gasifier

被引:1
作者
Mielke, Konrad [1 ]
Wu, Guixuan [1 ,2 ]
Eberhard, Mark [3 ]
Kolb, Thomas [4 ]
Mueller, Michael [1 ]
机构
[1] Forschungszentrum Julich, Inst Energy & Climate Res IEK 2, Wilhelm Johnen Str, D-52425 Julich, Germany
[2] GTT Technol, Kaiserstr 103, D-52134 Herzogenrath, Germany
[3] Karlsruhe Inst Technol, Inst Tech Chem ITC, POB 3640, D-76021 Karlsruhe, Germany
[4] Karlsruhe Inst Technol, Engler Bunte Inst, Engler Bunte Ring 9a, D-76131 Karlsruhe, Germany
关键词
Biomass fuels; Entrained‐ flow gasification; Oxide melts; Slag mobility; Viscosity; OXIDE MELTS RELEVANT; FULLY LIQUID SLAGS; VISCOSITY MODEL; PART; IRON-OXIDE; SYSTEMS; GASIFICATION;
D O I
10.1002/ceat.202000531
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
The bioliq (R) process, developed at the Karlsruhe Institute for Technology, aims at the production of synthetic fuels and chemicals from biomass. The bioliq (R) technology is based on a two-step process with decentral pyrolysis for the production of a transportable slurry from residual biomass and the central entrained-flow gasification of the slurry by using biomass-to-liquid technology. This study is focused on the slag, which is formed by melting the inorganic ash components during gasification. To operate the gasifier smoothly, a range of desired viscosity has to be defined. A structure-based viscosity model was used to predict the viscosity of the slags at the gasifier outlet. A good agreement between experimental and calculated viscosities is achieved for fully liquid slag systems.
引用
收藏
页码:1302 / 1310
页数:9
相关论文
共 50 条
[31]   Modelling study of characteristics of heat transfer and structural optimization of refractory layer in an entrained-flow gasifier [J].
Lin, Kuo ;
Shen, Zhongjie ;
Liang, Qinfeng ;
Xu, Jianliang ;
Liu, Haifeng .
APPLIED THERMAL ENGINEERING, 2020, 168
[32]   Determining criterion of the operating temperature in the refractory brick entrained-flow gasifier based on the coal viscosity characteristics and slag flow process [J].
Lin, Kuo ;
Shen, Zhongjie ;
Liang, Qinfeng ;
Dai, Zhenghua ;
Xu, Jianliang ;
Guo, Xiaolei ;
Liu, Haifeng .
CHEMICAL ENGINEERING SCIENCE, 2022, 250
[33]   Model of estimating viscosity based on slag structure in entrained flow gasifier [J].
Wang Q. ;
Li Q. ;
Zhang J. .
Huagong Xuebao/CIESC Journal, 2017, 68 (10) :3877-3883
[34]   Modeling and comparison of different syngas cooling types for entrained-flow gasifier [J].
Ni, Jianjun ;
Yu, Guangsuo ;
Guo, Qinghua ;
Dai, Zhenghua ;
Wang, Fuchen .
CHEMICAL ENGINEERING SCIENCE, 2011, 66 (03) :448-459
[35]   Experimental measurement of gas concentration distribution in an impinging entrained-flow gasifier [J].
Niu, Miaoren ;
Yan, Zhuoyong ;
Guo, Qinghua ;
Liang, Qinfeng ;
Yu, Guangsuo ;
Wang, Fuchen ;
Yu, Zunhong .
FUEL PROCESSING TECHNOLOGY, 2008, 89 (11) :1060-1068
[36]   Computational-Fluid-Dynamics-Based Evaluation and Optimization of an Entrained-Flow Gasifier Potential for Coal Hydrogasification [J].
Yan, Linbo ;
He, Boshu ;
Pei, Xiaohui ;
Wang, Chaojun ;
Liang, Huaxin ;
Duan, Zhipeng .
ENERGY & FUELS, 2013, 27 (11) :6397-6407
[37]   Modeling Study of the Slag Behaviors and SiC Refractory Wall Corrosion on the Top Cone of a Membrane Wall Entrained-Flow Gasifier [J].
Zhang, Binbin ;
Jin, Jing ;
Liu, Haifeng .
ENERGY & FUELS, 2020, 34 (10) :12440-12448
[38]   On-line simulation and optimization of a commercial-scale shell entrained-flow gasifier using a novel dynamic reduced order model [J].
Zhou, Hua ;
Xie, Taili ;
You, Fengqi .
ENERGY, 2018, 149 :516-534
[39]   Numerical modeling for non-steady thermal stress analysis of slag layer in a membrane wall entrained-flow gasifier [J].
Lin, Weining ;
Liang, Qinfeng ;
Yu, Guangsuo ;
Liu, Haifeng ;
Gong, Xin .
FUEL, 2011, 90 (07) :2396-2403
[40]   The study of slag discharge behavior of entrained-flow gasifier based on the viscosity-temperature characteristics of different types of coals [J].
Lin, Kuo ;
Shen, Zhongjie ;
Liang, Qinfeng ;
Xu, Jianliang ;
Guo, Xiaolei ;
Liu, Haifeng .
FUEL, 2021, 292