Effects of martensite morphology on dynamic torsional behavior in dual phase steels

被引：10
作者：
Kim, KJ [1 ]
Lee, CG
Lee, S
机构：
[1] Pohang Univ Sci & Technol, Ctr Adv Aerosp Mat, Pohang 790784, South Korea
[2] Korea Inst Machinery & Mat, Dept Mat Engn, Changwon 641010, South Korea
来源：
SCRIPTA MATERIALIA | 1997年 / 38卷 / 01期
关键词：
D O I：
10.1016/S1359-6462(97)00428-4
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Investigations on the dynamic torsional characteristics of the two dual phase steels reveal that fracture of the IQ-specimen proceeds a typical ductile fracture mode irrespective of strain rates. The SQ-specimen, on the other hand, is predominated by cleavage fracture under quasi-static loading, but shows ductile fracture with varying deformation and fracture mechanisms under dynamic loading. The SQ-specimen's ductile fracture under dynamic torsional loading is associated with deformation of martensites themselves, which releases the deformation constraint of ferrites and leads to an increase of fracture shear strain. It can be inferred from the dynamic shear stress-shear strain curves that adiabatic shear bands are easily formed in the IQ-specimen, whereas they are not in the SQ-specimen. This is because the initiation of microcracks at the martensite/ferrite interfaces and their propagation are caused by the difference in the deformation behavior between martensites and ferrites.
引用
收藏
页码：27 / 32
页数：6
相关论文
共 50 条
[31]   Impact of second phase morphology and orientation on the plastic behavior of dual-phase steels [J].
Ismail, Karim ;
Perlade, Astrid ;
Jacques, Pascal J. ;
Pardoen, Thomas ;
Brassart, Laurence .
INTERNATIONAL JOURNAL OF PLASTICITY, 2019, 118 :130-146
[32]   Study on microstructure and deformation behavior of dual-phase steels with high-martensite content [J].
Material Science and Engineering College, Shanghai University, Shanghai 200072, China .
Cailiao Rechuli Xuebao, 2008, 5 (49-52)
[33]   A new model to explain the unusual tensile behavior of high martensite dual-phase steels [J].
Asim Bag ;
K. K. Ray .
Metallurgical and Materials Transactions A, 2001, 32 :2400-2403
[34]   Correlation of ferrite and martensite micromechanical behavior with mechanical properties of ultrafine grained dual phase steels [J].
Jahanara, Amir Hossein ;
Mazaheri, Yousef ;
Sheikhi, Mohsen .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 764
[35]   The effect of strain rate and martensite volume fraction on tensile impact behavior of dual phase steels [J].
Xia, YM ;
Zhou, YX .
ADVANCES IN ENGINEERING PLASTICITY, PTS 1-2, 2000, 177-1 :231-236
[36]   A new model to explain the unusual tensile behavior of high martensite dual-phase steels [J].
Bag, A ;
Ray, KK .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (09) :2400-2403
[37]   Influence of the heat treatment path on the martensite phase and dry reciprocating wear behavior of dual-phase steels [J].
Bidmeshki, Cyrus ;
Shokuhfar, Ali ;
Abouei, Vahid .
METALLURGICAL RESEARCH & TECHNOLOGY, 2016, 113 (02) :203-U45
[38]   Effect of martensite morphology and volume fraction on strain hardening and fracture behavior of martensite-ferrite dual phase steel [J].
Zhang, Jiecen ;
Di, Hongshuang ;
Deng, Yonggang ;
Misra, R. D. K. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 627 :230-240
[39]   Martensite crystallography and chemistry in dual phase and fully martensitic steels [J].
Du, C. ;
Hoefnagels, J. P. M. ;
Kolling, S. ;
Geers, M. G. D. ;
Sietsma, J. ;
Petrov, R. ;
Bliznuk, V. ;
Koenraad, P. M. ;
Schryvers, D. ;
Amin-Ahmadi, B. .
MATERIALS CHARACTERIZATION, 2018, 139 :411-420
[40]   The effect of martensite volume fraction on topography of dual phase steels [J].
Rad, Vahideh Farzam ;
Khamedi, Ramin ;
Moradi, Ali-Reza .
MATERIALS LETTERS, 2019, 239 :21-23
12345