Flow Law, Microstructure and Corrosion Behavior of Friction Stir Welded 5A06 Alloy

被引:4
作者
Li Yajie [1 ]
Qin Fengming [1 ]
Liu Cuirong [1 ]
Wu Zhisheng [1 ]
机构
[1] Taiyuan Univ Sci & Technol, Taiyuan 030024, Shanxi, Peoples R China
基金
中国国家自然科学基金;
关键词
aluminum alloy; friction stir welding; flow pattern; microstructure; corrosion behavior; MECHANICAL-PROPERTIES; ALUMINUM-ALLOY; GRAIN-SIZE; JOINTS; PARAMETER; SHEETS;
D O I
暂无
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The evolution of metal flow, microstructure and corrosion properties of 5A06 alloy after friction stir welding were studied. Results show that the metal on the advancing side is curled directly into the threads and then is extruded down into the weld nugget zone by complex motions of torsion and swirl. However, the material on the retreating side encounters chaotic flow patterns. The electro backscattering diffraction results indicate that the grains in stir zone are pronouncedly refined by dynamic recrystallization, and the average grain size is about 6 mu m. The scanning electron microscope analyses display that beta-phase (Al3Mg2) and Al-6(Mn, Fe) are dispersedly distributed in the stir zone and the Al-6(Mn, Fe) is smaller than that in base material. The hardness profile is characterized by material softening along the cross-section and the minimum hardness (HV) value of 720 MPa is located in the interface between stirring zone and thermo-mechanically affected zone. It is evident that the stir zone exhibits better corrosion resistance than the base material. The corrosion potential of stir zone is 35 mV larger than that in base material (-0.725 V).
引用
收藏
页码:2353 / 2359
页数:7
相关论文
共 50 条
[41]   Correlation between microstructure and properties of 2219/5A06 dissimilar aluminum alloy welded joint [J].
Li H. ;
Xu G. ;
Zhang Y. ;
Wu S. ;
Wang F. .
Hanjie Xuebao/Transactions of the China Welding Institution, 2020, 41 (09) :8-15
[42]   Performance Analysis of Friction Stir Welded Lightweight Aluminum Alloy Sheet [J].
Wang Hongfeng ;
Zuo Dunwen ;
Liu Shengrong ;
Pu Jiafei ;
Song Weiwei .
JOURNAL OF ENGINEERING AND TECHNOLOGICAL SCIENCES, 2020, 52 (06) :821-836
[43]   Studies on salt fog corrosion behavior of friction stir welded AA7075 T651 aluminum alloy [J].
Rao, T. Srinivasa ;
Reddy, G. Madhusudhan ;
Rao, G. Srinivasa ;
Rao, S. R. Koteswara .
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2014, 105 (04) :375-385
[44]   Microstructure, texture, and mechanical properties of friction stir welded commercial brass alloy [J].
Heidarzadeh, A. ;
Saeid, T. ;
Klemm, V. .
MATERIALS CHARACTERIZATION, 2016, 119 :84-91
[45]   Microstructure, mechanical properties and stress corrosion behavior of friction stir welded joint of Al-Mg-Si alloy extrusion [J].
Lin, Sen ;
Deng, Yun-Lai ;
Lin, Hua-Qiang ;
Ye, Ling-Ying ;
Zhang, Zhen ;
Ji, Hua ;
Zhang, Xin-Ming .
RARE METALS, 2023, 42 (06) :2057-2067
[46]   Investigation on microstructure and localized corrosion behavior in the stir zone of dissimilar friction-stir-welded AA2024/7075 joint [J].
Zhang, Chenghang ;
Huang, Guangjie ;
Cao, Yu ;
Li, Qilei ;
Zhu, Yulong ;
Huang, Xinde ;
Liu, Qing .
JOURNAL OF MATERIALS SCIENCE, 2020, 55 (30) :15005-15032
[47]   Salt fog corrosion behavior of friction stir welded AA2014-T651 aluminum alloy [J].
Thamilarasan, Kollapuri ;
Rajendraboopathy, Sadayan ;
Reddy, Gankidi Madhusudhan ;
Rao, Tadivaka Srinivasa ;
Rao, Sajja Rama Koteswara .
MATERIALS TESTING, 2016, 58 (11-12) :932-938
[48]   Corrosion Behavior of Friction Stir Welded AA8090-T87 Aluminum Alloy [J].
Shyamlal, Chandrasekaran ;
Shanmugavel, Rajesh ;
Jappes, J. T. Winowlin ;
Nair, Anish ;
Ravichandran, M. ;
Abuthakeer, S. Syath ;
Prakash, Chander ;
Dixit, Saurav ;
Vatin, N., I .
MATERIALS, 2022, 15 (15)
[49]   Microstructure, mechanical and corrosion properties of differently cooled friction stir welded joints of Al and Mg alloys [J].
Arya, Pradyumn Kumar ;
Jain, Neelesh Kumar ;
Jayaprakash, Murugesan ;
Patel, Vinay Kumar .
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2022, 10 (03)
[50]   Microstructure and Corrosion Properties of Friction Stir-Welded High-Strength Low -Alloy Steel [J].
Behjat, Amir ;
Shamanian, Morteza ;
Atapour, Masoud ;
Sarmadi, Mohammad Ahl .
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2021, 74 (07) :1763-1774