Material adhesion and stresses on friction stir welding tool pins

被引：35

作者：

Mehta, M. ^{[1
]}

De, A. ^{[1
]}

DebRoy, T. ^{[2
]}

机构：

[1] Indian Inst Technol, Dept Mech Engn, Bombay 400076, Maharashtra, India

[2] Penn State Univ, Dept Mat Sci & Engn, University Pk, PA 16802 USA

来源：

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING | 2014年 / 19卷 / 06期

关键词：

Friction stir welding; Tool pin geometry; Polygonal pin; Tool durability; CHIP CONTACT LENGTH; PROCESSING ZONE; MECHANICAL-PROPERTIES; SHOULDER DIAMETER; ROTATIONAL SPEED; TENSILE-STRENGTH; ALUMINUM WELDS; FSW TOOL; PROFILE; PROBE;

D O I：

10.1179/1362171814Y.0000000221

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

During friction stir welding, polygonal tool pins experience severe stresses and, under certain conditions, loss of functionality due to adhesion of plasticised material on their surfaces. The extent of adhesion is analysed for various pin geometry and welding conditions based on the theory of machining. The effective stresses on the polygonal pins are evaluated following the principles of mechanics. The results show that the polygonal pins with fewer sides can avoid permanent adhesion of plasticised material at higher weld pitch, which is defined as a ratio of welding speed and tool rotational speed. The computed pin geometries for minimum adhesion are compared with the pin profiles recommended by various investigators based on independent experiments. The computed stresses show that pins with larger number of sides will experience lower stresses for any given set of welding variables.

引用

页码：534 / 540

页数：7

共 34 条

[1] An investigation of the tool-chip contact length and wear in high-speed turning of EN19 steel [J].

Abukhshim, NA ;

Mativenga, PT ;

Sheikh, MA .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2004, 218 (08) :889-903

[2]

[Anonymous], 2013, STANDARD TEST METHOD, P1, DOI [DOI 10.1520/D1238-13, 10.1520/E0008_E0008M, DOI 10.1520/E0008_E0008M]

[3] Load bearing capacity of tool pin during friction stir welding [J].

Arora, A. ;

Mehta, M. ;

De, A. ;

DebRoy, T. .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 61 (9-12) :911-920

[4] The influence of stirrer geometry on bonding and mechanical properties in friction stir welding process [J].

Boz, M ;

Kurt, A .

MATERIALS & DESIGN, 2004, 25 (04) :343-347

[5] Design of the friction stir welding tool using the continuum based FEM model [J].

Buffa, G ;

Hua, J ;

Shivpuri, R ;

Fratini, L .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 419 (1-2) :381-388

[6] On tool stirring action in friction stir welding of work hardenable aluminium alloys [J].

Buffa, G. ;

Campanella, D. ;

Fratini, L. .

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2013, 18 (02) :161-168

[7]

Chattopadhyay AB., 2000, MACHINIG MACHINE TOO, P84

[8] CFD modelling of friction stir welding of thick plate 7449 aluminium alloy [J].

Colegrove, P. A. ;

Shercliff, H. R. .

SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2006, 11 (04) :429-441

[9] Tool durability maps for friction stir welding of an aluminium alloy [J].

DebRoy, T. ;

De, A. ;

Bhadeshia, H. K. D. H. ;

Manvatkar, V. D. ;

Arora, A. .

PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 2012, 468 (2147) :3552-3570

[10] Influences of tool pin profile and axial force on the formation of friction stir processing zone in AA6061 aluminium alloy [J].

Elangovan, K. ;

Balasubramanian, V. ;

Valliappan, M. .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2008, 38 (3-4) :285-295

← 1 2 3 4 →