On matrix crack saturation in composite laminates

被引：34

作者：

Li, CS ^{[1
]}

Ellyin, F ^{[1
]}

Wharmby, A ^{[1
]}

机构：

[1] Univ Alberta, Dept Mech Engn, Edmonton, AB T6G 2G8, Canada

来源：

COMPOSITES PART B-ENGINEERING | 2003年 / 34卷 / 05期

基金：

加拿大自然科学与工程研究理事会;

关键词：

fibre; crack density; characteristic damage state;

D O I：

10.1016/S1359-8368(03)00020-9

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper presents a comparative experimental investigation on matrix crack saturation in the constrained laminae of glass-fibre resin composite laminates. Fatigue tests under load and strain control were conducted on [+/- theta/90(3)](S) and [0/ +/- theta(4)/0](T) laminates, respectively. The crack density was periodically measured by using digital image method and optical microscope examination during fatigue tests, to determine crack saturation. It is found that matrix crack saturation occurs in all laminates of different lay-ups under both stress and strain control cyclic loading. The crack density at saturation in the constrained plies is dependent on the cyclic loading type, the off-axis angle of the laminates, as well as the constraining ply. Based on the strain energy release rate, a crack saturation criterion is developed and the experimental findings are qualitatively analysed. (C) 2003 Elsevier Science Ltd. All rights reserved.

引用

页码：473 / 480

页数：8

共 50 条

[31] Estimation of crack density due to fragmentation of brittle ellipsoidal inhomogeneities embedded in a ductile matrix [J].

K. C. Le ;

M. Korobeinik ;

K. Hackl .

Archive of Applied Mechanics, 2005, 74 :439-448

[32] An insight into crack density, saturation rate, and porosity model of the 2001 Bhuj earthquake in the stable continental region of western India [J].

Mishra, O. P. ;

Singh, A. P. ;

Kumar, Dinesh ;

Rastogi, B. K. .

JOURNAL OF ASIAN EARTH SCIENCES, 2014, 83 :48-59

[33] Fatigue crack growth in a Tiβ21s/SCS-6 composite [J].

Liu, J ;

Bowen, P .

ACTA MATERIALIA, 2002, 50 (17) :4205-4218

[34] Statistical model for initiation governed intralaminar cracking in composite laminates during tensile quasi-static and cyclic tests [J].

Ben Kahla, H. ;

Ayadi, Z. ;

Edgren, F. ;

Pupurs, A. ;

Varna, J. .

INTERNATIONAL JOURNAL OF FATIGUE, 2018, 116 :1-12

[35] The effect of matrix microcracks on the stress-strain relationship in fiber composite tubes [J].

Roberts, SJ ;

Evans, JT ;

Gibson, AG ;

Frost, SR .

JOURNAL OF COMPOSITE MATERIALS, 2003, 37 (17) :1509-1523

[36] The　Interfacial　Microstructure　of　AlOFibre　Reinforced　Al－5．5Zn　Matrix　Composite [J].

Zhang Xiyan Gao Qing Liu Shikai Department of Materials Science and EngineeringSouthwest Jiaotong UniversityChengdu China .

Journal of Southwest Jiaotong University, 1996, (02) :61-64

[37] Analysis of Thermal Stress in Fiber-Matrix Composite Structure Using Abaqus [J].

Yadav, Ankesh ;

Sharma, Snigdha ;

Ghosh, Shilpi ;

Urooj, Shabana .

2015 2ND INTERNATIONAL CONFERENCE ON COMPUTING FOR SUSTAINABLE GLOBAL DEVELOPMENT (INDIACOM), 2015, :1698-1701

[38] A crack tip tracking algorithm for cohesive interface element analysis of fatigue delamination propagation in composite materials [J].

Kawashita, Luiz F. ;

Hallett, Stephen R. .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2012, 49 (21) :2898-2913

[39] Analytical modeling of energy-based matrix crack growth and fiber breakage in unidirectional ceramic matrix composites under static tensile behavior in the longitudinal direction [J].

Haruyama, Daichi ;

Kawagoe, Yoshiaki ;

Okabe, Tomonaga .

ADVANCED COMPOSITE MATERIALS, 2024,

[40] Comparison of mixed mode fracture criteria in finite element analysis for matrix crack density estimation of laminated composites [J].

Yuan, Mingqing ;

Zhao, Haitao ;

Tian, Li ;

Zhang, Boming ;

Yang, Yanzhi ;

Chen, Jia ;

Chen, Ji'an .

JOURNAL OF COMPOSITE MATERIALS, 2021, 55 (02) :277-289

← 1 2 3 4 5 →