Wear and high temperature oxidation behaviour of wire arc sprayed iron based coatings

被引：24

作者：

Li, R. ^{[1
]}

He, D. Y. ^{[1
]}

Zhou, Z. ^{[1
]}

Wang, Z. J. ^{[1
]}

Song, X. Y. ^{[1
]}

机构：

[1] Beijing Univ Technol, Coll Mat Sci & Engn, Beijing, Peoples R China

来源：

SURFACE ENGINEERING | 2014年 / 30卷 / 11期

基金：

北京市自然科学基金;

关键词：

FeCrB(CSi) coating; Wire arc spraying; Microstructure; Wear; High temperature oxidation; CORROSION BEHAVIOR; HOT CORROSION; ALLOY;

D O I：

10.1179/1743294414Y.0000000331

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

In the present work, FeCrB(CSi) cored wires (C17, C21 and C25) were designed and deposited as coatings by wire arc spraying. The microstructure, microhardness, wear and high temperature corrosion behaviour of the new coatings were investigated in comparison with a commercial Fe-Cr-Al coating. The FeCrB(CSi) coatings presented lamellar microstructures with some pores and microcracks and a few oxide inclusions. The microhardness of the coatings is much harder than those of the substrate and the commercial Fe-Cr-Al coating. The wear resistance of the coatings is much better than that of the uncoated substrate. Thermogravimetric analysis was used to evaluate the high temperature oxidation behaviour of the coatings at a temperature of 650 degrees C under cyclic oxidation conditions. The results show that the high temperature oxidation resistance of the C17 coating was not as good as the Fe-Cr-Al coating, while the C21 and C25 coatings exhibited better oxidation resistance than the FeCrAl coating.

引用

页码：784 / 790

页数：7

共 24 条

[1] Abrasion and corrosion resistance of new Ni-based coating deposited by HVOF thermal spray process [J].

Benegra, M. ;

Magnani, M. ;

Goldenstein, H. ;

Maranho, O. ;

Pintaude, G. .

SURFACE ENGINEERING, 2010, 26 (06) :463-468

[2] Effect of heat treatment on the microstructure and mechanical properties of Fe-based amorphous coatings [J].

Bin-you, Fu ;

Ding-yong, He ;

Li-dong, Zhao .

JOURNAL OF ALLOYS AND COMPOUNDS, 2009, 480 (02) :422-427

[3] Microstructural characterization of high velocity oxy-fuel sprayed coatings of Inconel 625 [J].

Edris, H ;

McCartney, DG ;

Sturgeon, AJ .

JOURNAL OF MATERIALS SCIENCE, 1997, 32 (04) :863-872

[4] Study of Corrosion Behavior of Arc Sprayed Aluminum Coating on Mild Steel [J].

Esfahani, Erfan Abedi ;

Salimijazi, Hamidreza ;

Golozar, Mohamad A. ;

Mostaghimi, Javad ;

Pershin, Larry .

JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2012, 21 (06) :1195-1202

[5] High Temperature Oxidation of Nickel-Based Cermet Coatings Composed of Al2O3 and TiO2 Nanosized Particles [J].

Farrokhzad, M. A. ;

Khan, T. I. .

OXIDATION OF METALS, 2014, 81 (1-2) :267-285

[6] Hot Corrosion of Cobalt-Based Alloy with (Na, K)2SO4 Coating At 900 °C [J].

Fu, Guangyan ;

Zhao, Xin ;

Liu, Qun ;

Su, Yong .

ADVANCED ENGINEERING MATERIALS, PTS 1-3, 2011, 194-196 :1305-1308

[7] Coating growth behavior during the plasma electrolytic oxidation process [J].

Hussein, R. O. ;

Northwood, D. O. ;

Nie, X. .

JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, 2010, 28 (04) :766-773

[8] Hot Corrosion Studies of Detonation-Gun-Sprayed NiCrAlY+0.4 wt.% CeO2 Coated Superalloys in Molten Salt Environment [J].

Kamal, Subhash ;

Jayaganthan, R. ;

Prakash, Satya .

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2011, 20 (06) :1068-1077

[9] Role of detonation gun spray Cr3C2-NiCr coating in improving high temperature corrosion resistance of SAE-213-T22 and SAE-347H steel in presence of Na2SO4-82%Fe2(SO4)3 salt deposits [J].

Kaur, M. ;

Singh, H. ;

Prakash, S. .

SURFACE ENGINEERING, 2010, 26 (06) :428-439

[10] Surface engineering analysis of detonation-gun sprayed Cr3C2-NiCr coating under high-temperature oxidation and oxidation-erosion environments [J].

Kaur, Manpreet ;

Singh, Harpreet ;

Prakash, Satya .

SURFACE & COATINGS TECHNOLOGY, 2011, 206 (2-3) :530-541

← 1 2 3 →