Multi-material 3D printing of a soft pressure sensor

被引：107

作者：

Emon, Md Omar Faruk ^{[1
]}

Alkadi, Faez ^{[1
,4
]}

Philip, Daryl George ^{[1
]}

Kim, Da-Hye ^{[2
]}

Lee, Kyung-Chang ^{[3
]}

Choi, Jae-Won ^{[1
,3
]}

机构：

[1] Univ Akron, Dept Mech Engn, 244 Sumner St, Akron, OH 44325 USA

[2] Korea Inst Ind Technol, Extreme Fabricat Technol Grp, Daegu 42994, South Korea

[3] Pukyong Natl Univ, Dept Control & Instrumentat Engn, Busan 48513, South Korea

[4] Jazan Univ, Dept Mech Engn, Jazan 45142, Saudi Arabia

来源：

ADDITIVE MANUFACTURING | 2019年 / 28卷

关键词：

3D printing; Stretchable electronics; Ionic liquid; Soft pressure sensor; Multi-Material direct-print; STRAIN SENSOR; SKIN; ENERGY; NANOCOMPOSITES; DESIGN;

D O I：

10.1016/j.addma.2019.06.001

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The emergence of smart technologies is spurring the development of a wider range of applications for stretchable and conformable sensors, as the design flexibility offered by additive manufacturing may enable the production of sensors that are superior to those produced by conventional manufacturing techniques. In this work, a multi-material 3D printing system with three extrusion heads was developed to fabricate a stretchable, soft pressure sensor built using an ionic liquid (IL)-based pressure-sensitive layer that was sandwiched between carbon nanotube (CNT)-based stretchable electrodes and encapsulated within stretchable top and bottom insulating layers. The sensor materials were modified in order to achieve 3D printable characteristics. The capability of the system was tested by printing structures made from three materials and a multilayer sensor via an extrusion-based direct-print process. Multi-material 3D printing of the sensor was successfully realized, as the sensing material retained its functionality once the printing process was complete.

引用

页码：629 / 638

页数：10

共 54 条

[31] Room temperature ionic liquids and their mixtures - a review [J].