Prediction of actual fatigue test temperature and isothermal fatigue life curves for non-crystallising rubber under fully relaxing uni-axial loading conditions

被引：15

作者：

Kocjan, Tadej ^{[1
]}

Nagode, Marko ^{[1
]}

Klemenc, Jernej ^{[1
]}

Oman, Simon ^{[1
]}

机构：

[1] Univ Ljubljana, Fac Mech Engn, Askerceva 6, SI-1000 Ljubljana, Slovenia

来源：

INTERNATIONAL JOURNAL OF FATIGUE | 2022年 / 157卷

关键词：

Heat accumulation; Hysteresis heat; Heat build-up; Test temperature; Isothermal fatigue curve; HEAT BUILDUP; NATURAL-RUBBER; CRACK-GROWTH; GENERATION; SIMULATION; BEHAVIOR;

D O I：

10.1016/j.ijfatigue.2021.106622

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The time to complete fatigue tests can be rather long, especially with high cycle fatigue. Increasing frequency in fatigue tests decreases the time needed to complete material characterisation. For rubber materials, considerable internal heat generation and relatively low thermal conductivity causes temperature rises that can greatly reduce fatigue lifetime. Based on both experimental tests under fully relaxing uni-axial loading conditions on a non-crystallising rubber compound and numerical simulations, a method for estimating test temperature and isothermal fatigue life curves is presented. The results of the comparison between measured and estimated surface temperature of the specimen show that the maximum estimation error is below 10 %.

引用

页数：13

共 40 条

[1] The effect of minimum stress and stress amplitude on the fatigue life of non strain crystallising elastomers [J].

Abraham, F ;

Alshuth, T ;

Jerrams, S .

MATERIALS & DESIGN, 2005, 26 (03) :239-245

[2]

Akutagawa K, 2017, CONSTITUTIVE MODELS FOR RUBBER X, P593

[3] The new interpretation for the heat build-up phenomena of rubbery materials during deformation [J].

Akutagawa, Keizo ;

Hamatani, Satoshi ;

Nashi, Takayuki .

POLYMER, 2015, 66 :201-209

[4]

[Anonymous], 1002008 JCGM, V2008

[5] PREDICTION OF HEAT GENERATION IN RUBBER OR RUBBER-METAL SPRINGS [J].

Banic, Milan S. ;

Stamenkovic, Dusan S. ;

Miltenovic, Vojislav Dj ;

Milosevic, Milos S. ;

Miltenovic, Aleksandar V. ;

Djekic, Petar S. ;

Rackov, Milan J. .

THERMAL SCIENCE, 2012, 16 :S527-S539

[6]

De Nardo L, 2017, WOODH PUBL SER BIOM, P203, DOI 10.1016/B978-0-08-100737-2.00009-1

[7]

Esmaeeli R, 2018, P ASME 2018 INT MECH, V9, DOI 10.1115/imece2018-88627

[8]

FLIR Systems Inc, 2015, FLIR AIRT DIES PART

[9]

Gent A.N., 2001, ENG RUBBER

[10] A method to predict the dynamical behaviors of carbon black filled natural rubber at different temperatures [J].

Hu, Xiaoling ;

He, Ruizhi ;

Huang, Youjian ;

Yin, Boyuan ;

Luo, Wenbo .

POLYMER TESTING, 2019, 79

← 1 2 3 4 →