Effect of hot isostatic pressing (HIP) treatment on the compressive properties of Ti6Al4V lattice structure fabricated by selective laser melting

被引：34

作者：

Yan, Xingchen ^{[1
]}

Lupoi, Rocco ^{[2
]}

Wu, Hongjian ^{[1
]}

Ma, Wenyou ^{[1
]}

Liu, Min ^{[1
]}

O'Donnel, Garrett ^{[2
]}

Yin, Shuo ^{[2
]}

机构：

[1] Guangdong Inst New Mat, Guangzhou 510651, Guangdong, Peoples R China

[2] Univ Dublin, Trinity Coll Dublin, Dept Mech & Mfg Engn, Parsons Bldg, Dublin 2, Ireland

来源：

MATERIALS LETTERS | 2019年 / 255卷

关键词：

SLM; Ti6Al4V; Lattice structure; HIP; MECHANICAL-PROPERTIES; FATIGUE-STRENGTH; HEAT-TREATMENT; MICROSTRUCTURE;

D O I：

10.1016/j.matlet.2019.126537

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this study, the compressive properties of selective laser melted (SLM) Ti6Al4V lattice structure were studied. Based on results and discussion, it was found that hot isostatic pressing (HIP) treatment significantly influenced the microstructure and compressive properties of the SLM Ti6Al4V lattice structure. HIP resulted in a transformation of acicular a' martensite in the AF sample into a mixture of a and I lathes and a simultaneous reduction of internal porosity from 5.9% in the AF state to 0.5% after HIP treatment. As a consequence, the HIP samples exhibited significantly improved compressive strength and fracture strain as compared to the AF sample. (C) 2019 Elsevier B.V. All rights reserved.

引用

页数：4

共 9 条

[1] On the effect of geometrical imperfections and defects on the fatigue strength of cellular lattice structures additively manufactured via Selective Laser Melting
Dallago, M.
Winiarski, B.
Zanini, F.
Carmignato, S.
Benedetti, M.
[J]. INTERNATIONAL JOURNAL OF FATIGUE, 2019, 124 : 348 - 360
[2] Fatigue and biological properties of Ti-6Al-4V ELI cellular structures with variously arranged cubic cells made by selective laser melting
Dallago, M.
Fontanari, V.
Torresani, E.
Leoni, M.
Pederzolli, C.
Potrich, C.
Benedetti, M.
[J]. JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2018, 78 : 381 - 394
[3] Additive manufactured porous titanium structures: Through-process quantification of pore and strut networks
Kim, Taek Bo
Yue, Sheng
Zhang, Ziyu
Jones, Eric
Jones, Julian R.
Lee, Peter D.
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2014, 214 (11) : 2706 - 2715
[4] Additive manufacturing of Ti6Al4V alloy: A review
Liu, Shunyu
Shin, Yung C.
[J]. MATERIALS & DESIGN, 2019, 164
[5] Effect of selective laser melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel
Liverani, E.
Toschi, S.
Ceschini, L.
Fortunato, A.
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2017, 249 : 255 - 263
[6] Fatigue strength improvement of selective laser melted Ti6Al4V using ultrasonic surface mechanical attrition
Yan, Xingchen
Yin, Shuo
Chen, Chaoyue
Jenkins, Richard
Lupoi, Rocco
Bolot, Rodolphe
Ma, Wenyou
Kuang, Min
Liao, Hanlin
Lu, Jian
Liu, Min
[J]. MATERIALS RESEARCH LETTERS, 2019, 7 (08): : 327 - 333
[7] Mechanical and in vitro study of an isotropic Ti6Al4V lattice structure fabricated using selective laser melting
Yan, Xingchen
Li, Qing
Yin, Shuo
Chen, Ziyu
Jenkins, Richard
Chen, Chaoyue
Wang, Jiang
Ma, Wenyou
Bolot, Rodolphe
Lupoi, Rocco
Ren, Zhongming
Liao, Hanlin
Liu, Min
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 782 : 209 - 223
[8] Effect of heat treatment on the phase transformation and mechanical properties of Ti6Al4V fabricated by selective laser melting
Yan, Xingchen
Yin, Shuo
Chen, Chaoyue
Huang, Chunjie
Bolot, Rodolphe
Lupoi, Rocco
Kuang, Min
Ma, Wenyou
Coddet, Christian
Liao, Hanlin
Liu, Min
[J]. JOURNAL OF ALLOYS AND COMPOUNDS, 2018, 764 : 1056 - 1071
[9] Effect of heat treatment on the microstructure and mechanical properties of Ti6Al4V gradient structures manufactured by selective laser melting
Zhang, Mingkang
Yang, Yongqiang
Wang, Di
Xiao, Zefeng
Song, Changhui
Weng, Changwei
[J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 736 : 288 - 297

← 1 →