The effect of sintering pressure on the microstructure and properties of a nanocrystalline magnesium alloy in spark plasma sintering

被引：10
作者：
Kim, Ka Ram [1 ]
Kim, Hye Sung [1 ]
Kwon, Soon Hong [2 ]
Hwang, Dae-Youn [3 ]
机构：
[1] Pusan Natl Univ, Dept Nano Fus Technol, Miryang 627706, South Korea
[2] Pusan Natl Univ, Dept Bioind Machinery Engn, Miryang 627706, South Korea
[3] Pusan Natl Univ, Dept Biomat Sci, Miryang 627706, South Korea
来源：
JOURNAL OF THE KOREAN PHYSICAL SOCIETY | 2014年 / 65卷 / 10期
关键词：
Degassing treatment; Particle boundary; Pore; Spark plasma sintering; ZN-Y ALLOY; MECHANICAL-PROPERTIES; POWDER; BEHAVIOR; FRACTURE; CU; PD;
D O I：
10.3938/jkps.65.1669
中图分类号：
O4 [物理学];
学科分类号：
0702 ;
摘要：
Many studies have shown that particle boundaries in spark plasma sintering (SPS) can be easily removed by using a combination of sintering temperature and pressure. We already reported that a degassing treatment prior to sintering by SPS was a critical step to remove particle-particle boundaries effectively and to obtain a magnesium alloy having high strength and high ductility. In this study, the microstructural evolution and the mechanical properties of nanocrystalline Mg-6%Al alloys were investigated to determine the effect of sintering pressure combined with an appropriate degassing treatment.
引用
收藏
页码：1669 / 1674
页数：6
相关论文
共 22 条
  • [1] Corrosion Behavior and Microstructural Evolution of Magnesium Powder with Milling Time Prepared by Mechanical Milling
    Ahn, Jin Woo
    Hwang, Dae Youn
    Kim, Gyeung-ho
    Kim, Hye Sung
    [J]. KOREAN JOURNAL OF METALS AND MATERIALS, 2011, 49 (06): : 454 - 461
  • [2] A microstructure study of nanostructured Fe-Mo+1.5 wt.%SiO2 and+1.5 wt.%TiO2 powders compacted by spark plasma sintering
    Cabibbo, M.
    Paternoster, C.
    Cecchini, R.
    Fabrizi, A.
    Molinari, A.
    Libardi, S.
    Zadra, M.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 496 (1-2): : 121 - 132
  • [3] Spark plasma sintering of magnesia-doped alumina with high hardness and fracture toughness
    Chakravarty, Dibyendu
    Bysakh, Sandip
    Muraleedharan, Kuttanellore
    Rao, Tata Narasinga
    Sundaresan, Ranganathan
    [J]. JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2008, 91 (01) : 203 - 208
  • [4] Choi J. W., 2009, TRENDS METALS MAT EN, V22, P3
  • [5] Danninger H., 2002, POWDER METALL PROG, V2, P125
  • [6] German R. M., 1984, METALL T A, V15, P749
  • [7] SYNTHESIS, PROCESSING, AND DEFORMATION OF BULK NANOPHASE FE-28A1-2CR INTERMETALLIC
    JAIN, M
    CHRISTMAN, T
    [J]. ACTA METALLURGICA ET MATERIALIA, 1994, 42 (06): : 1901 - 1911
  • [8] Rapidly solidified powder metallurgy Mg97Zn1Y2Alloys with excellent tensile yield strength above 600 MPa
    Kawamura, Y
    Hayashi, K
    Inoue, A
    Masumoto, T
    [J]. MATERIALS TRANSACTIONS, 2001, 42 (07) : 1172 - 1176
  • [9] The Effect of Sintering Parameters on the Microstructure and Properties of Mg-6%Al Alloy in Spark Plasma Sintering
    Kim, Ka Ram
    Song, Byung Ju
    Yang, Yong Suk
    Kim, Hye Sung
    [J]. KOREAN JOURNAL OF METALS AND MATERIALS, 2013, 51 (08): : 585 - 593
  • [10] Effect of powder size of Mg-Zn-Y alloy on the consolidation
    Kim, Taek-Soo
    Chae, H. J.
    Lee, J. K.
    Jung, H. G.
    Kim, Y. D.
    Bae, J. C.
    [J]. PROGRESS IN POWDER METALLURGY, PTS 1 AND 2, 2007, 534-536 : 793 - +
123