Mechanical alloying as a solid state route for fabrication of Al-Cu-M(=Fe, Cr) quasicrystalline phases

被引：19

作者：

Salimon, A. I. ^{[1
]}

Shevchukov, A. P. ^{[1
]}

Stepashkin, A. A. ^{[1
]}

Tcherdyntsev, V. V. ^{[1
]}

Olifirov, L. K. ^{[1
]}

Kaloshkin, S. D. ^{[1
]}

机构：

[1] Natl Univ Sci & Technol MISiS, Moscow 119049, Russia

来源：

JOURNAL OF ALLOYS AND COMPOUNDS | 2017年 / 707卷

关键词：

Quasicrystals; Mechanical alloying; Scanning electron microscopy; X-ray diffraction; Thermal analysis; Grain growth; TRANSFORMATIONS; MICROSTRUCTURE; INTERMETALLICS; COMPOSITES;

D O I：

10.1016/j.jallcom.2016.11.173

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

Almost single phase quasicrystalline powders consisting of icosahedral Al65Cu23Fe12 and decagonal Al73Cu11Cr16 phases were produced by mechanical alloying (MA) and subsequent heat-treatment. Microstructure, particle size distribution, chemical and phase composition of crystalline powder precursors forming under MA from elemental powders of Al, Cu, Fe and Cr were investigated. Phase transformations leading to formation of quasicrystals during heating of precursors were determined by differential thermal analysis and X-ray diffraction. The growth of quasicrystalline grains studied by SEM is discussed. (C) 2016 Elsevier B.V. All rights reserved.

引用

页码：315 / 320

页数：6

共 50 条

[1] Towards the growth of single quasicrystalline grains in Al-Cu-(Fe,Cr) alloys after mechanical alloying and subsequent high temperature heating
Salimon, A. I.
Stepashkin, A. A.
Tcherdyntsev, V. V.
Olifirov, L. K.
Klyueva, M. V.
Kaloshkin, S. D.
JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 720 : 95 - 104
[2] The quasicrystalline phase formation in Al-Cu-Cr alloys produced by mechanical alloying
Sviridova, T. A.
Shevchukov, A. P.
Shelekhov, E. V.
Diakonov, D. L.
Tcherdyntsev, V. V.
Kaloshkin, S. D.
JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 : S299 - S303
[3] Attainment of quasicrystalline phase in Al-Cu-Fe alloy via melting and mechanical alloying
Esquivel, Rosalba
Suarez, Miguel A.
Diaz-Barriga, Lucia
Chavez, Federico
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2012, 103 (09) : 1137 - 1143
[4] Al-Cu-Fe quasicrystalline phase formation by mechanical alloying
Tcherdyntsev, VV
Kaloshkin, SD
Salimon, AI
Leonova, EA
Tomilin, IA
Eckert, J
Schurack, F
Rogozin, VD
Pisarev, SP
Trykov, YP
MATERIALS AND MANUFACTURING PROCESSES, 2002, 17 (06) : 825 - 841
[5] Influence of Cr alloying on the microstructure of thermally sprayed quasicrystalline Al-Cu-Fe coatings
Huttunen-Saarivirta, E
Turunen, E
Kallio, M
INTERMETALLICS, 2003, 11 (09) : 879 - 891
[6] Physical vapor deposition route for production of Al-Cu-Fe-Cr and Al-Cu-Fe quasicrystalline and approximant coatings
Daniels, MJ
King, D
Fehrenbacher, L
Zabinski, JS
Bilello, JC
SURFACE & COATINGS TECHNOLOGY, 2005, 191 (01) : 96 - 101
[7] Solid solution in Al-4.5 wt% Cu produced by mechanical alloying
Fogagnolo, J. B.
Amador, D.
Ruiz-Navas, E. M.
Torralba, J. M.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 433 (1-2): : 45 - 49
[8] Crystallochemical aspects of solid state reactions in mechanically alloyed Al-Cu-Fe quasicrystalline powders
Salimon, AI
Korsunsky, AM
Shelekhov, EV
Sviridova, TA
Kaloshkin, D
Tcherdyntsev, VS
Baldokhin, YV
ACTA MATERIALIA, 2001, 49 (10) : 1821 - 1833
[9] Fabrication of nanocrystalline alloys Cu-Cr-Mo super satured solid solution by mechanical alloying
Aguilar, C.
Guzman, D.
Castro, E.
Martinez, V.
de las Cuevas, F.
Lascano, S.
Muthiah, T.
MATERIALS CHEMISTRY AND PHYSICS, 2014, 146 (03) : 493 - 502
[10] The Formation of Quasicrystal Phase in Al-Cu-Fe System By Mechanical Alloying
Travessa, Dilermando Nagle
Cardoso, Katia Regina
Wolf, Witor
Jorge, Alberto Moreira, Jr.
Botta, Walter Jose
MATERIALS RESEARCH-IBERO-AMERICAN JOURNAL OF MATERIALS, 2012, 15 (05): : 749 - 752

← 1 2 3 4 5 →