Lubricated compression and X-ray microtomography to analyse the rheology of a fibre-reinforced mortar

被引:28
作者
Chalencon, F. [1 ,3 ]
Orgeas, L. [1 ]
Dumont, P. J. J. [2 ]
Foray, G. [3 ]
Cavaille, J. -Y. [3 ]
Maire, E. [3 ]
du Roscoat, S. Rolland [1 ,4 ]
机构
[1] Univ Grenoble, Lab Sols Solides Struct Risques 3SR, CNRS, Grenoble INP UJF, F-38041 Grenoble, France
[2] CNRS, Inst Polytech Grenoble Grenoble INP, Lab Genie Procedes Papetiers LGP2, F-38402 St Martin Dheres, France
[3] Inst Natl Sci Appl, CNRS, Lab MATEIS, F-69621 Villeurbanne, France
[4] European Synchrotron Radiat Facil, Beamline ID19, F-38043 Grenoble, France
关键词
Fibre suspension; Granular system; Lubricated compression; X-ray microtomography; SELF-COMPACTING CONCRETE; MECHANICAL-PROPERTIES; BUNDLE SUSPENSIONS; BEHAVIOR; COMPOSITES; FLOW; POLYPROPYLENE; ORIENTATION; MORPHOLOGY; EVOLUTION;
D O I
10.1007/s00397-009-0393-5
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
In this work, the microstructure and the rheology of a glass-fibre-reinforced fresh mortar were studied. Various fibre contents and aspect ratios and two types of fibrous reinforcement, i.e. slender fibre bundles and fibres, were tested. The microstructure was analysed by using X-ray microtomography. It is shown that the non-deformed mortar is a porous granular suspension, the porous microstructure of which is not influenced by the presence of fibres, which in turn display a 2D planar random fibre orientation. The rheology was investigated by subjecting samples to constant axial strain rate and lubricated compression. The roles of the actual strain, the mortar resting time, the fibre content and aspect ratio on recorded stress levels are emphasised. Besides, for the investigated strain rate and material parameters, the mortar flow is quasi-incompressible and does not affect significantly the porous microstructure nor the fibrous one. Lastly, the stress increase which is induced by the addition of fibre bundles is similar to that predicted by Newtonian models of semi-dilute fibre suspensions.
引用
收藏
页码:221 / 235
页数:15
相关论文
共 46 条
[1]   THE USE OF TENSORS TO DESCRIBE AND PREDICT FIBER ORIENTATION IN SHORT FIBER COMPOSITES [J].
ADVANI, SG ;
TUCKER, CL .
JOURNAL OF RHEOLOGY, 1987, 31 (08) :751-784
[2]   The morphology of entrained air voids in hardened cement paste generated with different anionic surfactants [J].
Atahan, H. N. ;
Carlos, C., Jr. ;
Chae, S. ;
Monteiro, P. J. M. ;
Bastacky, J. .
CEMENT & CONCRETE COMPOSITES, 2008, 30 (07) :566-575
[3]   Rheology of low carbon fibre content reinforced cement mortar [J].
Banfill, P. F. G. ;
Starrs, G. ;
Derruau, G. ;
McCarter, W. J. ;
Chrisp, T. M. .
CEMENT & CONCRETE COMPOSITES, 2006, 28 (09) :773-780
[4]   Advances in synchrotron radiation microtomography [J].
Baruchel, Jos ;
Buffiere, Jean-Yves ;
Cloetens, Peter ;
Di Michiel, Marco ;
Ferrie, Emilie ;
Ludwig, Wolfgang ;
Maire, Eric ;
Salvo, Luc .
SCRIPTA MATERIALIA, 2006, 55 (01) :41-46
[5]   The Visible Cement Data Set [J].
Bentz, DP ;
Mizell, S ;
Satterfield, S ;
Devaney, J ;
George, W ;
Ketcham, P ;
Graham, J ;
Porterfield, J ;
Quenard, D ;
Vallee, F ;
Sallee, H ;
Boller, E ;
Baruchel, J .
JOURNAL OF RESEARCH OF THE NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY, 2002, 107 (02) :137-148
[6]   Contribution of hybrid fibers on the properties of the high-strength lightweight concrete having good workability [J].
Chen, B ;
Liu, JY .
CEMENT AND CONCRETE RESEARCH, 2005, 35 (05) :913-917
[7]  
Coussot P, 2005, RHEOMETRY OF PASTES, SUSPENSIONS, AND GRANULAR MATERIALS: APPLICATIONS IN INDUSTRY AND ENVIRONMENT, P1, DOI 10.1002/0471720577
[8]   A model for short-range interactions in fibre suspensions [J].
Djalili-Mogaddam, M ;
Toll, S .
JOURNAL OF NON-NEWTONIAN FLUID MECHANICS, 2005, 132 (1-3) :73-83
[9]  
DOI M, 1978, J CHEM SOC FARAD T 2, V74, P560, DOI 10.1039/f29787400560
[10]   Anisotropic viscous behavior of sheet molding compounds (SMC) during compression molding [J].
Dumont, P ;
Orgéas, L ;
Le Corre, S ;
Favier, D .
INTERNATIONAL JOURNAL OF PLASTICITY, 2003, 19 (05) :625-646