Optimization of material removal rate of Ti-6Al-4V using Rao-1 algorithm

被引：3
|
作者：
Agarwal, Neeraj [1 ]
Irshad, Md [1 ]
Singh, Mahendra Raj [2 ]
Singh, Gurjeet [1 ]
机构：
[1] IES Coll Technol, Dept Mech Engn, Bhopal 462044, MP, India
[2] Shri Ram Inst Technol, Dept Mech Engn, Jabalpur 482002, MP, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2022年 / 62卷 / P12期
关键词：
Electrical discharge machining; MRR; Advanced optimization; Rao-1; algorithm; RSM; DISCHARGE MACHINING CHARACTERISTICS; PROCESS PARAMETERS; SURFACE-ROUGHNESS; EDM PARAMETERS; SPEED; MODEL;
D O I：
10.1016/j.matpr.2022.04.760
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Titanium alloy Ti6Al4V has attractive properties for engineering applications. Electric discharge machining is nowadays widely adapted for titanium alloy machining to produce proper geometric profiles and surface integrity. EDM has a high machining cost and has a lower material removal rate (MRR). It is always desirable to improve the machining efficiency. This research involves, enhancing the MRR of Titanium alloy during EDM. The influence of four EDM input parameters on MRR is investigated in this research. Current, pulse on time, voltage and duty factor is selected as EDM control parameters. Response surface methodology (RSM) is utilized to create a design of experiment (DOE) plan. Thirty experiments were conducted as per the DOE. The experimental results are used to develop a predictable quadratic regression model for MRR using RSM. This MRR regression model is optimized using an advanced optimization technique, the Rao-1 algorithm. This is a new algorithm and easier to implement. The study reveals current and voltage are identified as the most influential factors in the MRR. Copyright (C) 2022 Elsevier Ltd. All rights reserved.
引用
收藏
页码：6722 / 6726
页数：5
相关论文
共 50 条
  • [41] OPTIMIZATION OF REAMING PROCESS PARAMETERS FOR TITANIUM TI-6AL-4V ALLOY USING GREY RELATIONAL ANALYSIS
    Ahmed, Shakeel L.
    Kumar, Pradeep M.
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2016, VOL. 2, 2016,
  • [42] Design optimization of Spoke IPM motor for improving efficiency using PSO and Rao-1 algorithm based FEA
    Naik S.
    Bag B.
    Chandrasekaran K.
    Materials Today: Proceedings, 2023, 80 : 400 - 408
  • [43] Optimization of process parameters for high speed machining of Ti-6Al-4V using response surface methodology
    Khalid H. Hashmi
    Ghulam Zakria
    Muhammad Baqar Raza
    Shahid Khalil
    The International Journal of Advanced Manufacturing Technology, 2016, 85 : 1847 - 1856
  • [44] Analysis and optimization of cutting parameters under high-speed machining of Ti-6Al-4V alloy
    Khare, Sanchit Kumar
    Phull, Gurpreet Singh
    MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 4058 - 4064
  • [45] Multi-Objective Optimization of Electrochemical Cut-off Grinding Process of Ti-6Al-4V using PCA based Grey Relational Analysis
    Yadav, Sunil Kumar
    Yadav, Sanjeev Kumar Singh
    MATERIALS TODAY-PROCEEDINGS, 2020, 22 : 3089 - 3099
  • [46] Simulation of fatigue small crack growth in additive manufactured Ti-6Al-4V material
    Gupta, A.
    Sun, W.
    Bennett, C. J.
    CONTINUUM MECHANICS AND THERMODYNAMICS, 2020, 32 (06) : 1745 - 1761
  • [47] Optimization of process parameters for micro milling of Ti-6Al-4V alloy using Taguchi-based gray relational analysis
    Aslantas, K.
    Ekici, E.
    Cicek, A.
    MEASUREMENT, 2018, 128 : 419 - 427
  • [48] Optimization of SiC Abrasive Parameters on Machining of Ti-6Al-4V Alloy in AJM Using Taguchi-Grey Relational Method
    Saravanan K
    Francis Xavier J
    Sudeshkumar M.P
    T. Maridurai
    Vijayananth Suyamburajan
    V. Jayaseelan
    Silicon, 2022, 14 : 997 - 1004
  • [49] Localization of Plastic Deformation in Ti-6Al-4V Alloy
    Skripnyak, Vladimir V.
    Skripnyak, Vladimir A.
    METALS, 2021, 11 (11)
  • [50] EXCIMER-LASER PROCESSING OF TI-6AL-4V
    FOLKES, JA
    SHIBATA, K
    JOURNAL OF LASER APPLICATIONS, 1994, 6 (02) : 81 - 87
12345