Parametrized overview of CO2 power cycles for different operation conditions and configurations - An absolute and relative performance analysis

This thermodynamically based study focuses on. the thermal performance of power cycles using CO2 as the working fluid. The work considers numerous aspects that can influence the cycle's performance, such as the type of cycle (i.e., Rankine or Brayton), its configuration (i.e., with and without a recuperator), and different operational conditions (i.e., heat source temperature and the upper and lower operating pressures of the CO2). To account for all possible scenarios, a thermodynamic routine was especially implemented and linked to a library that contained all the thermodynamics properties of CO2. The results are mostly presented in terms of the absolute and relative 1st and 2nd Law efficiencies of CO2 as well as the cycle's scale, here represented by the global conductance (UA) of the heat exchangers used within the cycle. For the relative performance assessment, four other working fluids, commonly used in energy conversion cycles, were considered (i.e., ethane, toluene, D4 siloxane and water). As expected, the absolute performance results indicate a strong dependence of the cycle's efficiencies on the operational conditions. As for the relative performance, the results suggest that while the CO2's 1st Law' efficiency might be lower than other fluids, its exergetic efficiency can be significantly higher. Furthermore, the calculations also indicate that the CO2's needed global conductance is potentially lower than competing fluids (e.g., toluene) for certain operational conditions, which suggests that CO2-based power plants can be more compact, since they might require smaller heat exchangers to produce a reference power output of 1 kW. (C) 2016 Elsevier Ltd. All rights reserved.