Effect of Cr Content on the Compression Properties and Abrasive Wear Behavior of the High-Volume Fraction (TiC-TiB2)/Cu Composites

被引：17
作者：
Qiu, Feng [1 ]
Han, Yue [1 ]
Cheng, Ai [1 ]
Lu, Jianbang [1 ]
Jiang, Qichuan [1 ]
机构：
[1] Jilin Univ, Key Lab Automobile Mat, Minist Educ, Dept Mat Sci & Engn, Changchun 130025, Peoples R China
来源：
ACTA METALLURGICA SINICA-ENGLISH LETTERS | 2014年 / 27卷 / 05期
基金：
高等学校博士学科点专项科研基金; 中国国家自然科学基金;
关键词：
Metal matrix composites; Powder metallurgy; Combustion synthesis; Abrasive wear; COPPER MATRIX COMPOSITES; IN-SITU SYNTHESIS; MECHANICAL-PROPERTIES; CARBON; MICROSTRUCTURE; TIB2;
D O I：
10.1007/s40195-014-0158-8
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The (TiC-TiB2)/Cu composites with 50 vol% TiC-TiB2 ceramic particles were successfully fabricated by the combustion synthesis and hot press consolidation in a Cu-Ti-B4C-Cr system. The effects of the Cr content on the microstructures, hardness, compression properties, and abrasive wear behaviors of the composites were investigated. The final products consist of only Cu, TiC, and TiB2 phases, and the ceramic particles are distributed uniformly in these composites. The size of the ceramic particles decreases with Cr addition. As the Cr content increases, the yield strength, ultimate compression strength, microhardness, and abrasive wear resistance of the composites increase, and the fracture strain decreases.
引用
收藏
页码：951 / 956
页数：6
相关论文
共 50 条
[41]   The Effect of TiB2 Content on Wear and Mechanical Behavior of AZ91 Magnesium Matrix Composites Produced by Powder Metallurgy [J].
Fatih Aydin ;
Yavuz Sun ;
M. Emre Turan .
Powder Metallurgy and Metal Ceramics, 2019, 57 :564-572
[42]   Effect of TiB, TiC and Y2O3 on tensile properties and creep behavior at 650 °C of titanium matrix composites [J].
Zheng, Yunfei ;
Xu, Lijuan ;
Yu, Jianxin ;
Liang, Zhenquan ;
Xue, Xiang ;
Xiao, Shulong ;
Tian, Jing ;
Chen, Yuyong .
JOURNAL OF ALLOYS AND COMPOUNDS, 2022, 908
[43]   Mechanical properties and failure behavior of 3D printed thermoplastic composites using continuous basalt fiber under high-volume fraction [J].
Zhang, Hang ;
Sun, Wei-fu .
DEFENCE TECHNOLOGY, 2023, 27 :237-250
[44]   The Effect of TiN-TiB2 on the Microstructure, Wear, and Nanoindentation Behavior of Ti6Al4V-Ni-Cr Matrix Composites [J].
Oluwasegun Eso Falodun ;
Samuel Ranti Oke ;
Samuel Olukayode Akinwamide ;
Olawale Olarewaju Ajibola ;
Abdullahi Olawale Adebayo ;
Sunday Gbenga Borisade ;
Adeolu Adesoji Adediran ;
Peter Apata Olubambi .
Journal of Materials Engineering and Performance, 2023, 32 :5566-5575
[45]   Effect of ZrO2 particles on the nanomechanical properties and wear behavior of AlCoCrFeNi-ZrO2 high entropy alloy composites [J].
Ghanbariha, M. ;
Farvizi, M. ;
Ebadzadeh, T. ;
Samiyan, A. Alizadeh .
WEAR, 2021, 484
[46]   Effect of TiCp volume fraction and WCp addition on the mechanical properties of TiCp/Cr8Mo2VSi composites [J].
Wang, Fengbin ;
Du, Jianming ;
Zhao, Shengnian ;
Lu, Dehong ;
Jiang, Yehua ;
Li, Fei ;
Li, Dou .
MATERIALS RESEARCH EXPRESS, 2024, 11 (03)
[47]   Impact of high Al2O3 content on the microstructure, mechanical properties, and wear behavior Al-Cu-Mg/Al2O3 composites prepared by mechanical milling [J].
Beder, Murat ;
Varol, Temel ;
Akcay, Serhatcan Berk .
CERAMICS INTERNATIONAL, 2024, 50 (20) :38610-38631
[48]   Effect of high-entropy alloy binder content on the microstructure, mechanical properties and oxidation behavior of Ti(C,N)-TiB2 cermets [J].
Fu, Peixin ;
Li, Zhanjiang ;
Wen, Xiao ;
Liu, Chao ;
Chang, Fa ;
Lin, Liangliang ;
Dai, Pinqiang .
JOURNAL OF THE CERAMIC SOCIETY OF JAPAN, 2021, 129 (08) :504-515
[49]   Effect of Cr on Microstructure, Mechanical Properties, and Wear Behavior of In Situ 20 wt.%Al2O3/Fe-25Al Composites [J].
Bai, Yaping ;
Xing, Jiandong ;
Guo, Yongchun ;
Li, Jianping ;
He, Yuanyuan ;
Ma, Shengqiang .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2015, 24 (02) :936-945
[50]   Effect of Cr on Microstructure, Mechanical Properties, and Wear Behavior of In Situ 20 wt.%Al2O3/Fe-25Al Composites [J].
Yaping Bai ;
Jiandong Xing ;
Yongchun Guo ;
Jianping Li ;
Yuanyuan He ;
Shengqiang Ma .
Journal of Materials Engineering and Performance, 2015, 24 :936-945
12345