Box-Behnken Analysis Of Surface Modification Of Aluminium Alloy AA6061 Using Roller Burnishing

被引：1
作者：
Kumar, Sunil [1 ]
Maity, Saikat Ranjan [1 ]
Patnaik, Lokeswar [1 ]
机构：
[1] Natl Inst Technol, Dept Mech Engn, Silchar- 788010, India
来源：
MATERIALS TODAY-PROCEEDINGS | 2019年 / 18卷
关键词：
Box-Behnken; Design of Experiment; Speed; feed; surface roughness and micro hardness; BALL; ROUGHNESS; OPTIMIZATION; PARAMETERS; MECHANICS; CONTACT; QUALITY; ELEMENT;
D O I：
10.1016/j.matpr.2019.07.445
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Burnishing is a surface modification process for any kind of ferrous, non-ferrous and ceramic materials. It improves the smoothness of surface, increase micro hardness, wear resistance and fatigue resistance of the surface. In this study, peripheral surface of the workpiece has been targeted, which is rotated by means of lathe spindle. Roller is rotating and sliding on to the peripheral surface with some load. This experimental investigation is carried out on to the Aluminium-based alloy workpiece to investigate surface characteristics such as surface roughness and micro hardness before burnishing and after burnishing. There are three significant parameters such as speed, feed rate and number of tool pass have been contemplated. Box- Behnken design of experiment is opted for the purpose. The burnishing speed and number of pass are the most consequential parameter whereas feed rate has less effect on the surface roughness and micro hardness. (C) 2019 Elsevier Ltd. All rights reserved.
引用
收藏
页码：4613 / 4621
页数：9
相关论文
共 50 条
[41]   Optimization of roller burnishing process on EN-9 grade alloy steel using response surface methodology [J].
John, M. R. Stalin ;
Banerjee, Nilanjan ;
Shrivastava, Karuna ;
Vinayagam, B. K. .
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2017, 39 (08) :3089-3101
[42]   Surface modification and fatigue properties of electrical discharge machined aluminum alloy 6061 using plasma etching [J].
Kuo, Chin-Guo ;
Hsu, Chun-Yao ;
Chen, Jung-Hsuan ;
Lee, Po-Wei .
ADVANCES IN MECHANICAL ENGINEERING, 2018, 10 (01)
[43]   Modelling and Analysis of the Mechanical Properties of Agave Sisalana Variegata Fibre/Vinyl Ester Composites Using Box-Behnken Design of Response Surface Methodology [J].
Athijayamani, Ayyanar ;
Ganesamoorthy, Raju ;
Loganathan, Konda Thulasiraman ;
Sidhardhan, Susaiyappan .
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING, 2016, 62 (05) :273-280
[44]   Systematic investigation on parameters of solution blown micro/nanofibers using response surface methodology based on box-Behnken design [J].
Lou, Huiqing ;
Li, Wentao ;
Li, Chulin ;
Wang, Xinhou .
JOURNAL OF APPLIED POLYMER SCIENCE, 2013, 130 (02) :1383-1391
[45]   Statistical Modeling of Oxalic Acid Adsorption on Rice Bran Using Response Surface Methodology- Box-Behnken Design [J].
Langeroodi, Narges Samadani .
IRANIAN JOURNAL OF CHEMISTRY & CHEMICAL ENGINEERING-INTERNATIONAL ENGLISH EDITION, 2024, 43 (12) :4340-4347
[46]   RESPONSE SURFACE MODELLING FOR REACTIVE DYE REMOVAL USING BIO-SOLIDS: APPLICATION OF BOX-BEHNKEN EXPERIMENTAL DESIGN [J].
Cebeci, Meltem Sarioglu ;
Gokcek, Oznur Begum .
FRESENIUS ENVIRONMENTAL BULLETIN, 2015, 24 (12) :4265-4272
[47]   Enhanced styrene recovery from waste polystyrene pyrolysis using response surface methodology coupled with Box-Behnken design [J].
Mo, Yu ;
Zhao, Lei ;
Wang, Zhonghui ;
Chen, Chia-Lung ;
Tan, Giin-Yu Amy ;
Wang, Jing-Yuan .
WASTE MANAGEMENT, 2014, 34 (04) :763-769
[48]   Optimization of fluoride removal by activated clays using response surface methodology: Box-Behnken design, kinetic and isotherm studies [J].
Yahya, K. ;
Msadok, I. ;
Moussa, K. B. ;
Ba, M. ;
Hajri, A. K. ;
Mlayah, A. ;
Srasra, E. ;
Hamdi, N. .
INTERNATIONAL JOURNAL OF ENVIRONMENTAL SCIENCE AND TECHNOLOGY, 2024, 21 (12) :7923-7940
[49]   Box-Behnken based investigation of surface quality and tool wear rate and FEM analysis of tool wear in TiAlN/CrN coated carbide tool [J].
Patnaik, Lokeswar ;
Kumar, Sunil ;
Gajjar, Jatin ;
Dash, Priyadarshini ;
Maity, Saikat Ranjan ;
Lepicka, Magdalena ;
Devi, P. Booma .
INTERNATIONAL JOURNAL OF INTERACTIVE DESIGN AND MANUFACTURING - IJIDEM, 2024, 18 (09) :6381-6396
[50]   Preparation of robust superhydrophobic surface on PET substrate using Box-Behnken design and facile sanding method with PTFE powder [J].
Wang, Xin ;
Wang, Tao ;
Sheng, Jie ;
Wang, Ziting ;
Yang, Weizhi ;
Li, Meng ;
Shi, Liping .
JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2024, 34 (04)
12345