Use of rice husks as potential filler in styrene butadiene rubber/linear low density polyethylene blends in the presence of maleic anhydride

被引：86
作者：
Khalf, A. I. [1 ]
Ward, A. A. [2 ]
机构：
[1] Natl Res Ctr, Dept Polymers & Pigments, Cairo, Egypt
[2] Natl Res Ctr, Microwave Phys & Dielect Dept, Cairo, Egypt
来源：
MATERIALS & DESIGN | 2010年 / 31卷 / 05期
关键词：
Thermoplastic elastomer; Compatibilizer; Rice husk; Mechanical properties; Dielectric properties; Morphology; MECHANICAL-PROPERTIES; WATER-ABSORPTION; WOOD FLOUR; RUBBER; POLYPROPYLENE; ASH; COMPOSITES; MORPHOLOGY;
D O I：
10.1016/j.matdes.2009.11.056
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the present study, rice husks filled styrene butadiene rubber (SBR)/linear low density polyethylene (LLDPE) 50/50 blends with a compatibilizer, maleic anhydride (MAH) were prepared using a brabender plasti-corder. Virgin SBR/LLDPE blend was also prepared. The physico-mechanical as well as dielectric properties were investigated. Increasing MAH concentrations in SBR/LLDPE blends resulted in an increase in the tensile strength, elongation at break and hardness. After a certain concentration (2.5 phr), a reduction in these properties was found. On the other hand an increase in the dielectric properties as well as in the mass swell in both toluene and oil with MAH was noticed. After certain concentration of rice husk filler (25 phr) an abrupt increase in permittivity epsilon' and dielectric loss epsilon '' was obtained. These results are supported by the mechanical properties measurements. The scanning electron microscopy (SEM) indicates that the presence of MAH increases the interfacial interaction between SBR/LLDPE blends on one hand and also rice husk filler and the blend on the other hand. (C) 2009 Elsevier Ltd. All rights reserved.
引用
收藏
页码：2414 / 2421
页数：8
相关论文
共 27 条
[11]  
Haxo J.R., 1975, Rubber Chemistry and Technology, V48, P271, DOI DOI 10.5254/1.3547453
[12]  
Hill NE., 1969, DIELECTRIC PROPERTIE
[13]   AN INVESTIGATION ON THE POTENTIAL OF RICE HUSK ASH AS FILLERS FOR EPOXIDIZED NATURAL-RUBBER (ENR) [J].
ISHAK, ZAM ;
BAKAR, AA .
EUROPEAN POLYMER JOURNAL, 1995, 31 (03) :259-269
[14]   Blend of waste poly(vinylchloride) (PVCw)/acrylonitrile butadiene-rubber (NBR): the effect of maleic anhydride (MAH) [J].
Ismail, H ;
Supri ;
Yusof, AMM .
POLYMER TESTING, 2004, 23 (06) :675-683
[15]   A comparative study on processing, mechanical properties, thermo-oxidative aging, water absorption, and morphology of, rice husk powder and silica fillers in polystyrene/styrene butadiene rubber blends [J].
Ismail, H ;
Mohamad, Z ;
Bakar, AA .
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2003, 42 (01) :81-103
[16]   The effect of a compatibilizer on the mechanical properties and mass swell of white rice husk ash filled natural rubber/linear low density polyethylene blends [J].
Ismail, H ;
Nizam, JM ;
Khalil, HPSA .
POLYMER TESTING, 2001, 20 (02) :125-133
[17]   Effect of wood filler treatment and EBAGMA compatibilizer on morphology and mechanical properties of low density polyethylene/olive husk flour composites [J].
Kaci, M. ;
Djidjelli, H. ;
Boukerrou, A. ;
Zaidi, L. .
EXPRESS POLYMER LETTERS, 2007, 1 (07) :467-473
[18]   Broadband dielectric relaxation spectroscopy in interpenetrating polymer networks of polyurethane-copolymer of butyl methacrylate and dimethacrylate triethylene glycol [J].
Kanapitsas, A ;
Pissis, P ;
Karabanova, L ;
Sergeeva, L ;
Apekis, L .
POLYMER GELS AND NETWORKS, 1998, 6 (02) :83-102
[19]  
Kim HS, 2004, J THERM ANAL CALORIM, V76, P395
[20]  
Ku C.C., 1987, ELECT PROPERTIES POL
123