Impulse Magnetization of Nd-Fe-B Sintered Magnets for Sensors

被引：6

作者：

Przybylski, Marek ^{[1
]}

Kapelski, Dariusz ^{[1
]}

Slusarek, Barbara ^{[1
]}

Wiak, Slawomir ^{[2
]}

机构：

[1] Tele & Radio Res Inst, Ratuszowa 11 St, PL-03450 Warsaw, Poland

[2] Lodz Univ Technol, Inst Mechatron & Informat Syst, Stefanowskiego 18-22 St, PL-90924 Lodz, Poland

来源：

SENSORS | 2016年 / 16卷 / 04期

关键词：

Nd-Fe-B permanent magnets; permanent magnets; impulse magnetization; magnetic saturation; magnetic induction; coercivity; POST-ASSEMBLY MAGNETIZATION; FIXTURES; DESIGN; FIELD; MOTORS;

D O I：

10.3390/s16040569

中图分类号：

O65 [分析化学];

学科分类号：

070302 ; 081704 ;

摘要：

Magnetization of large Nd-Fe-B sintered permanent magnets is still challenging. This type of permanent magnet is electrically conductive, so impulse magnetization causes a flow of eddy currents which prevent magnetization of the whole volume of the magnet. The paper deals with the impulse magnetization of sintered Nd-Fe-B permanent magnets and shows a method for the determination of suitable parameters for the supply system. The necessary magnetic field strength for magnetization of the magnet to saturation was determined. The optimal magnetizing fixture supply voltage for magnetization to saturation was determined from simulations in PSpice software, finite element analyses in Maxwell 15 and measurements. Measurements of magnetic induction on the surface of the Nd-Fe-B magnet are also presented to ensure that a magnet with 70 mm diameter and 20 mm in height is fully saturated.

引用

页数：14

共 24 条

[1]

Braybrooks K.A., 1954, British Patent, Patent No. 710738

[2] Experimental study of an electromagnetic flow meter for liquid metals based on torque measurement during pumping process [J].

Dubovikova, N. ;

Kolesnikov, Y. ;

Karcher, Ch .

MEASUREMENT SCIENCE AND TECHNOLOGY, 2015, 26 (11)

[3] Characteristics regulation for manufacture of permanent-magnet motors using post-assembly magnetization [J].

Hsieh, Min-Fu ;

Hsu, You-Chiuan .

IEEE TRANSACTIONS ON MAGNETICS, 2007, 43 (06) :2510-2512

[4]

Jewell G.W., 1991, P 5 INT C EL MACH DR, P16

[5] COMPUTER-AIDED-DESIGN OF MAGNETIZING FIXTURES FOR THE POST-ASSEMBLY MAGNETIZATION OF RARE-EARTH PERMANENT-MAGNET BRUSHLESS DC MOTORS [J].

JEWELL, GW ;

HOWE, D .

IEEE TRANSACTIONS ON MAGNETICS, 1992, 28 (05) :3036-3038

[6] SIMULATION OF CAPACITOR DISCHARGE MAGNETIZATION [J].

JEWELL, GW ;

HOWE, D ;

BIRCH, TS .

IEEE TRANSACTIONS ON MAGNETICS, 1990, 26 (05) :1638-1640

[7] The design of radial-field multipole impulse magnetizing fixtures for isotropic NdFeB magnets [J].

Jewell, GW ;

Howe, D ;

Riley, CD .

IEEE TRANSACTIONS ON MAGNETICS, 1997, 33 (01) :708-722

[8]

Karbowiak M., 2011, ELEKTRONIKA

[9]

Karbowiak M., 2011, ZESZYTY PROBLEMOWE M, P49

[10] THE ANALYSIS OF A MAGNETIZING FIXTURE FOR A MULTIPOLE ND-FE-B MAGNET [J].

LEE, JK .

IEEE TRANSACTIONS ON MAGNETICS, 1988, 24 (05) :2166-2171

← 1 2 3 →