Mathematical Modeling And Design Optimization Of Plunge Shaving Cutter For Gears With Tooth Modifications

被引：0

作者：

Chang, Shinn-Liang ^{[1
]}

Liu, Jia-Hung ^{[2
]}

机构：

[1] Natl Formosa Univ, Inst Mech & Electromech Engn, Huwei Township 632, Yunlin County, Taiwan

[2] Luren Precis Co Ltd, Hsinchu 30078, Taiwan

来源：

IAENG TRANSACTIONS ON ENGINEERING TECHNOLOGIES, VOL 3 | 2009年 / 1174卷

关键词：

Gear plunge shaving; Cone grinding wheel; Topographic error; Protuberance hob cutter; Shaving cutter clearance; SIMULATION; PARAMETERS; SPUR;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Gears are the most important components in transmission systems Modifications of gear teeth can accommodate errors and deformations encountered in the manufacture, assembly, and operation of gear pairs For plunge shaving gears with tooth modifications, the design criteria of cutter clearance manufactured by protuberance hob cutter is investigated. With this novel design, the cutter has better strength and stiffness to keep the shaved gear profile stable With the analytical descriptions of crowned gear and hence plunge shaving cutter have been constructed so that the grinding wheel can be optimized to minimized the topographic error Efficiency is greatly improved by avoiding the traditional trial and error method

引用

页码：267 / +

页数：2

共 17 条

[1]

BIANCO G, 2000, GEAR SHAVING

[2] Comparison of three teeth and whole body models in spur gear analysis [J].

Çelik, M .

MECHANISM AND MACHINE THEORY, 1999, 34 (08) :1227-1235

[3]

CHANG SL, 2008, 2008 IAENG INT C IND

[4]

CHANG SL, 2007, 2007 IAENG INT C IND

[5]

CHEN SD, 2005, Patent No. 231237

[6]

HOU J, 1997, THESIS U CINCINNATI

[7]

HSIEH JK, 2007, P 12 WORLD C MECH MA

[8] Theoretical and practical investigations regarding the influence of the Serration's geometry and position on the tooth surface roughness by shaving with plunge gear cutter [J].

Hsu, RH ;

Fong, ZH .

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2006, 220 (02) :223-242

[9] Simulation of gear shaving with considerations of cutter assembly errors and machine setting parameters [J].

Hung, Ching-Hua ;

Liu, Jia-Hung ;

Chang, Shinn-Liang ;

Lin, Hung-Jeng .

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2007, 35 (3-4) :400-407

[10] Influence of tooth profile deviations on helical gear wear [J].

Kahraman, A ;

Bajpai, P ;

Anderson, NE .

JOURNAL OF MECHANICAL DESIGN, 2005, 127 (04) :656-663

← 1 2 →