Magnetostrictive behaviour of Fe73.5Si13.5B9Nb3-xMoxCu1 alloys

被引：10
|
作者：
Silveyra, J. M. [1 ]
Cremaschi, V. J. [1 ]
Vlasak, G. [2 ]
Illekova, E. [2 ]
Janickovic, D. [2 ]
Svec, P. [2 ]
机构：
[1] UBA CONICET, Fac Ingn, INTECIN, Lab Solidos Amorfos, Buenos Aires, DF, Argentina
[2] Slovak Acad Sci, Inst Phys, Bratislava 84511, Slovakia
来源：
JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS | 2010年 / 322卷 / 16期
关键词：
Magnetostriction; Dilatometry; Nanocrystalline;
D O I：
10.1016/j.jmmm.2010.02.036
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Magnetostriction, dilatation and calorimetric measurements were performed on FINEMET type as quenched and heat treated ribbons. Nb was gradually replaced by Mo in order to study the influence of the refractory elements exchange on several magnetostriction parameters. The results could be correlated with magnetic and structural transformations throughout thermal treatments and assured that the whole series is suitable for technical applications. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码：2350 / 2354
页数：5
相关论文
共 50 条
  • [41] Stress induced anisotropy and magnetostriction in Fe73.5B7Cu1Nb3Si15.5 alloy:: Interface effects
    Alves, F
    Barrué, R
    Delage, M
    Desmoulins, JB
    Lecaudé, N
    Perron, JC
    ADVANCES IN NANOCRYSTALLIZATION, 1999, 307 : 89 - 94
  • [42] Magnetostriction hysteresis loops of annealed Fe73.5CU1Nb3Si15.5B7 metallic glass strips
    Kaczkowski, Z
    Ruuskanen, P
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 1996, 157 : 201 - 202
  • [43] Comparison of nanocrystallization processes in Fe73.5Cu1Nb3Si(22.5-x)Bx for x=7 and x=9
    Lecaude, N
    Perron, JC
    MECHANICALLY ALLOYED, METASTABLE AND NANOCRYSTALLINE MATERIALS, PART 2, 1998, 269-2 : 713 - 718
  • [44] Investigations of effective magnetic anisotropy and magnetostriction of amorphous and nanocrystalline Fe71.5Cu1Nb3Al2Si13.5B9 alloy by FMR
    Zuberek, R
    Miguel, C
    González, J
    García-Tello, P
    Aranda, GR
    Kulik, T
    Szymczak, H
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2004, 375 : 1173 - 1176
  • [45] Magnetic properties of Fe74.5-xCuxTa3Si13.5B9 as-quenched ribbons
    Li, Bo
    Hu, Jifan
    Qin, Hongwei
    Li, Lun
    MATERIALS TRANSACTIONS, 2008, 49 (08) : 1757 - 1759
  • [46] Effect of the Current Annealing (without and with Tensile Stress) on the Soft Magnetic Behaviour of Fe73.5-x(Co0.5Ni0.5)xSi13.5B9Nb3Cu1 Alloy Ribbons (x=2.5, 5 and 10)
    Iturriza, N.
    Nazmunnahar, M.
    Dominguez, L.
    Gonzalez, J.
    del Val, J. J.
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2012, 12 (06) : 5071 - 5075
  • [47] Preparation of bulk Fe75Nb3Si13B9 amorphous and nanocrystalline alloys by spark plasma sintering
    Feng, Y. T.
    Wang, X. H.
    Wang, G.
    Li, Q.
    FERROELECTRICS, 2016, 505 (01) : 190 - 199
  • [48] Structure and magnetic properties of Ni5(Fe0.5Co0.5)68.5Si13.5Nb3B9Cu alloy
    Jia, Yun-yun
    Wang, Zhi
    Wang, Jia
    Shi, Rui-min
    JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, 2012, 324 (23) : 3981 - 3985
  • [49] Near-Zero Magnetostrictive Nanocrystalline Fe-Si-B-Cu-Nb Alloys Obtained After a High Heating Rate Annealing
    Toyonaga, Kotoba
    Ito, Naoki
    Ogawa, Yuichi
    IEEE TRANSACTIONS ON MAGNETICS, 2023, 59 (11)
  • [50] Sintering behaviour of magnetic bulk glassy cores obtained from Fe71Nb3.7Cu1Al3Mn0.8Si13.5B7alloy powder
    Panda, A. K.
    Das, S. K.
    De, P. K.
    Mitra, A.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 184 (1-3) : 300 - 304
12345