Biosorption of nickel from protonated rice bran

In the present study biosorption technique, the accumulation of metals by biomass was used for the removal of nickel from aqueous medium. The rice bran in its acid treated (H3PO4) form was used as a low cost sorbent. The adsorption characteristics of nickel on protonated rice bran were evaluated as a function of pH, biosorbent size, biosorbent dosage, initial concentration of nickel and time. Within the tested pH range (pH 1-7), the protonated rice bran displayed more resistance to pH variation, retaining up to 102 mg/g of the nickel binding capacity at pH 6. Meanwhile, at lower pH values the uptake capacity decreased. The % age removal of nickel was maximum at 0.25 g of biosorbent dose and 0.25 turn biosorbent size. At the optimal conditions, metal ion uptake was increased as the initial metal ion concentration increased up to 100 mg/L. Kinetic and isotherm experiments were carried out at the optimal pH 6.0 for nickel. The metal removal rate was rapid, with 57% of the total adsorption taking place within 15-30 min. The Freundlich and Langmuir models were used to describe the uptake of nickel on protonated rice bran. The Langmuir and Freundlich model parameters were evaluated. The equilibrium adsorption data was better fitted to Langmuir adsorption isotherm model. The adsorption followed pseudo second-order kinetic model. The thermodynamic assessment of the metal ion-rice bran biomass system indicated the feasibility and spontaneous nature of the process and triangle G degrees values were evaluated as ranging from -22.82 to -24.04kJ/mol for nickel sorption. The order of magnitude of the triangle G degrees values indicated an ion-exchange physiochemical sorption process. (C) 2006 Elsevier B.V. All rights reserved.