Comparison between Mechanical Properties and Structures of a Rolled and a 3D-Printed Stainless Steel

被引：23

作者：

Natali, Stefano ^{[1
]}

Brotzu, Andrea ^{[1
]}

Pilone, Daniela ^{[1
]}

机构：

[1] Sapienza Univ Roma, Dipartimento ICMA, Via Eudossiana 18, I-00184 Rome, Italy

来源：

MATERIALS | 2019年 / 12卷 / 23期

关键词：

additive manufacturing; mechanical properties; selective laser melting; MICROSTRUCTURE; OPTIMIZATION; PERFORMANCE; STRENGTH;

D O I：

10.3390/ma12233867

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

In this work selective laser melting was successfully utilized to produce 316 stainless steel bulk specimens. Although this technology provides many advantages compared to conventional shaping processes, little residual porosity may be a problem for some applications where high strength is required. The objective of this work was to determine, through data analysis, a mechanical and metallographic comparison between thin sheets made by using different manufacturing technologies: Cold rolling and additive manufacturing. This comparison was useful to understand whether it could be more advantageous to use the prototyping for new mechanical components. The results show that the additive manufactured steel, due to its microstructure, is characterized by a higher yield strength and by a lower elongation and ultimate tensile strength.

引用

页数：8

共 14 条

[1]

[Anonymous], 2001, SOLID FREEFORM FABRI

[2] On the origin of the high tensile strength and ductility of additively manufactured 316L stainless steel: Multiscale investigation [J].

Barkia, Bassem ;

Aubry, Pascal ;

Haghi-Ashtiani, Paul ;

Auger, Thierry ;

Gosmain, Lionel ;

Schuster, Frederic ;

Maskrot, Hicham .

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2020, 41 :209-218

[3] Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing [J].

Everton, Sarah K. ;

Hirsch, Matthias ;

Stravroulakis, Petros ;

Leach, Richard K. ;

Clare, Adam T. .

MATERIALS & DESIGN, 2016, 95 :431-445

[4] A critical review of powder-based additive manufacturing of ferrous alloys: Process parameters, microstructure and mechanical properties [J].

Fayazfar, Haniyeh ;

Salarian, Mehrnaz ;

Rogalsky, Allan ;

Sarker, Dyuti ;

Russo, Paola ;

Paserin, Vlad ;

Toyserkani, Ehsan .

MATERIALS & DESIGN, 2018, 144 :98-128

[5] Anisotropy and heterogeneity of microstructure and mechanical properties in metal additive manufacturing: A critical review [J].

Kok, Y. ;

Tan, X. P. ;

Wang, P. ;

Nai, M. L. S. ;

Loh, N. H. ;

Liu, E. ;

Tor, S. B. .

MATERIALS & DESIGN, 2018, 139 :565-586

[6] Microstructure and performance optimisation of stainless steel formed by laser additive manufacturing [J].

Li, J. ;

Deng, D. ;

Hou, X. ;

Wang, X. ;

Ma, G. ;

Wu, D. ;

Zhang, G. .

MATERIALS SCIENCE AND TECHNOLOGY, 2016, 32 (12) :1223-1230

[7] Control of shape and performance for direct laser fabrication of precision large-scale metal parts with 316L Stainless Steel [J].

Ma, Mingming ;

Wang, Zemin ;

Wang, Dengzhi ;

Zeng, Xiaoyan .

OPTICS AND LASER TECHNOLOGY, 2013, 45 :209-216

[8]

Saeidi K., 2019, STAINLESS STEELS ALL, P113, DOI [10.5772/intechopen.80468, DOI 10.5772/INTECHOPEN.80468]

[9] An overview overview of Direct Laser Deposition for additive manufacturing; Part II: Mechanical behavior, process parameter optimization and control [J].

Shamsaei, Nima ;

Yadollahi, Aref ;

Bian, Linkan ;

Thompson, Scott M. .

ADDITIVE MANUFACTURING, 2015, 8 :12-35

[10]

Wang YM, 2018, NAT MATER, V17, P63, DOI [10.1038/NMAT5021, 10.1038/nmat5021]

← 1 2 →