Impact of Laser Machining on the Structure and Properties of Tool Steels

被引：0

作者：

Ulewicz, Robert ^{[1
]}

Selejdak, Jacek ^{[1
]}

机构：

[1] Czestochowa Univ Tech, Armii Krajowej 19B, Czestochowa, Poland

来源：

TEROTECHNOLOGY, 2017 | 2018年 / 5卷

关键词：

Laser Heat Treatment; Tool Steel;

D O I：

10.21741/9781945291814-7

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

The paper presents the results of research of the impact of laser treatment on the properties of the surface layer of tool steel. Two grades of tool steel were qualified for the tests and they were subjected to a pulse laser and a continuous-mode laser treatment. In order to analyze the influence of laser beam impact on the properties of the surface layer of the studied material, metallographic investigations and microhardness profile tests were carried out in the surface layer.

引用

页码：37 / 40

页数：4

共 10 条

[1] Fractal Analysis of AFM Data Characterizing Strongly Isotropic and Anisotropic Surface Topography
Bramowicz, Miroslaw
Kulesza, Slawomir
Lipinski, Tomasz
Szabracki, Pawel
Piatkowski, Pawel
[J]. APPLIED CRYSTALLOGRAPHY XXII, 2013, 203-204 : 86 - +
[2] The weld toe improvement of advanced HSLA steel by laser remelting
Lago, Jan
Bokuvka, Otakar
Novy, Frantisek
[J]. MATERIALS TODAY-PROCEEDINGS, 2016, 3 (04) : 1037 - 1040
[3] Radek N., 2016, PRODUCTION ENG ARCH, V13, P44, DOI [10.30657/pea.2016.13.10, DOI 10.30657/PEA.2016.13.10]
[4] The Average Friction Coefficient of Laser Textured Surfaces of Silicon Carbide Identified by RSM Methodology
Radek, Norbert
Pietraszek, Jacek
Antoszewski, Bogdan
[J]. TEROTECHNOLOGY, 2014, 874 : 29 - +
[5] Influence of laser power on the corrosive resistance of WC-Cu coating
Scendo, Mieczyslaw
Trela, Joanna
Radek, Norbert
[J]. SURFACE & COATINGS TECHNOLOGY, 2014, 259 : 401 - 407
[6] Schmidova E, 2010, 41. MEZINARODNI KONFERENCE O NATEROVYCH HMOTACH, KNH 2010, P281
[7] THE EFFECTS OF LASER SURFACE HARDENING ON MICROSTRUCTURAL CHARACTERISTICS AND WEAR RESISTANCE OF AISI H11 HOT WORK TOOL
Sebek, M.
Falat, L.
Kovac, F.
Petryshynets, I.
Hornak, P.
Girman, V.
[J]. ARCHIVES OF METALLURGY AND MATERIALS, 2017, 62 (03) : 1721 - 1726
[8] Szataniak P, 2014, METAL 2014: 23RD INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, P778
[9] Characteristics of surface layer of sintered stainless steels after remelting using GTAW method
Wronska, A.
Dudek, A.
[J]. ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING, 2014, 14 (03) : 425 - 432
[10] Investigation on the optimized heat treatment procedure for laser fabricated IN718 alloy
Zhang, Yaocheng
Yang, Li
Chen, Tingyi
Zhang, Weihui
Huang, Xiwang
Dai, Jun
[J]. OPTICS AND LASER TECHNOLOGY, 2017, 97 : 172 - 179

← 1 →