Iron corrosion in Callovo-Oxfordian argilite: From experiments to thermodynamic/kinetic modelling

被引:51
作者
de Combarieu, G.
Barboux, P.
Minet, Y.
机构
[1] CEA Marcoule, DEN DTCDE DECM LCLT, F-30207 Bagnols Sur Ceze, France
[2] Ecole Natl Super Chim Paris, LCAES, UMR7574, F-75005 Paris, France
关键词
corrosion; iron; Callovo-Oxfordian; serpentine; mixed-layer illite-smectite minerals;
D O I
10.1016/j.pce.2006.04.019
中图分类号
P [天文学、地球科学];
学科分类号
07 ;
摘要
Many designs for high-level nuclear waste deep geological disposal include steel waste canister and low-alloy steel overpacks. The container and overpack corrosion products may affect the alteration kinetics of nuclear waste glass and contaminant retention properties due to mineralogical transformation in the surrounding clay. To better quantify the effect of corrosion on the mineralogical alteration of the clay, the present study reports the corrosion of pure iron in raw Callovo-Oxfordian argilite. Batch experiments have been carried out at 90 degrees C, from one to six months, under oxygen-free atmosphere. Iron corrosion kinetics and secondary mineral formation have been studied with quantitative XRD measurements. Chemical analyses have been performed by ICP-AES, ICP-MS and ionic chromatography. Eh and pH have also been monitored along with the reaction progress. The phases formed from the Fe release in solution are magnetite and Fe-rich silicate from the serpentine group (greenalite or cronstedtite) or chlorite. These phases are associated to the dissolution of quartz, illite and interstratified illite/sinectite mixed layers. Solution analyses show that the Si, Fe, Mg and A] concentrations are controlled at a very low level by the precipitation of newly formed phases, although a noticeable pH increase (from 7 to 10 at 90 degrees C) is associated to iron corrosion. In the conditions of the experiments, the iron corrosion rate has been measured (R-iron= 6 x 10(-9) Mol/M-2/S equivalent to 1.4 pm/year) and is in good agreement with previous works. The use of the geochernical code CHESS based on (i) solution analysis, (ii) mineral quantification and (iii) determination of kinetic data for iron corrosion allows to reproduce accurately this reaction-path. Fractionation of dissolved iron between iron silicate and magnetite can be correctly predicted, as well as the pH, Eh and other minerals stability. ((C) 2006 Elsevier Ltd. All rights reserved.
引用
收藏
页码:346 / 358
页数:13
相关论文
共 40 条
[1]  
[Anonymous], CLAYS NATURAL ENG BA
[2]   Kaolinite and smectite dissolution rate in high molar KOH solutions at 35° and 80°C [J].
Bauer, A ;
Berger, G .
APPLIED GEOCHEMISTRY, 1998, 13 (07) :905-916
[3]   PHYSICOCHEMICAL CHARACTERIZATION OF CORROSION LAYERS FORMED ON IRON IN A SODIUM CARBONATE-BICARBONATE CONTAINING ENVIRONMENT [J].
BLENGINO, JM ;
KEDDAM, M ;
LABBE, JP ;
ROBBIOLA, L .
CORROSION SCIENCE, 1995, 37 (04) :621-643
[4]   Smectite dissolution kinetics at 80°C and pH 8.8 [J].
Cama, J ;
Ganor, J ;
Ayora, C ;
Lasaga, CA .
GEOCHIMICA ET COSMOCHIMICA ACTA, 2000, 64 (15) :2701-2717
[5]  
CHIVOT J, 2004, ANDRA PUBL
[6]  
CLARET F, 2001, THESIS U J FOURRIER
[7]  
Cornell R.M., 1996, The Iron Oxide: Structure, Properties, Reactions, Occurance and Uses
[8]  
DAVID D, 2001, ANDRA PUBL
[9]  
Debruyn W., 1991, EUR13667 CEC
[10]   Characterisation of iron archaeological analogues using micro diffraction under synchrotron radiation. Application to the study of long term corrosion behaviour of low alloy steels [J].
Dillmann, P ;
Neff, D ;
Mazaudier, F ;
Hoerle, S ;
Chevallier, P ;
Beranger, G .
JOURNAL DE PHYSIQUE IV, 2002, 12 (PR6) :393-408