Effect of the superplasticizer type on the properties of the fly ash blended cement

被引：73

作者：

Tkaczewska, E. ^{[1
]}

机构：

[1] AGH Univ Sci & Technol, Fac Mat Sci & Ceram, Dept Bldg Mat Technol, PL-30059 Krakow, Poland

来源：

CONSTRUCTION AND BUILDING MATERIALS | 2014年 / 70卷

关键词：

Siliceous fly ash; Blended cement; Superplasticizer; Hydration heat; Setting time; Compressive strength; SULFATE RESISTANCE; ADMIXTURES; STRENGTH; COMPATIBILITY; FLUIDITY;

D O I：

10.1016/j.conbuildmat.2014.07.096

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

In the paper the effect of the superplasticizer type on the properties of fly ash blended cement - in terms of hydration heat, setting time and compressive strength - was studied. The used admixtures were sulfonated melamine-formaldehyde condensate (SMF), sulfonated naphthalene-formaldehyde condensate (SNF), polycarboxylate (PC) and polycarboxylate ether (PCE). Control sample was Portland fly ash cement CEM II/A-V 42.5R. Superplasticized Portland fly ash cement mortars were prepared taking the values of standard water of consistency with different addition of each type of superplasticizers used. Results revealed that the decrease in water content required was 15% for SMF, 31% for SNF, 42% for PC and 47% for PCE. Polycarboxylates were found to have to higher efficiency in improving the hydration heat evolution, setting time and mechanical properties of cement than that of traditional superplasticizers SMF and SW. Addition to control fly ash blended cement polycarboxylate ether-based superplasticizer gives cement CEM II/A-V 52.5N. (C) 2014 Elsevier Ltd. All rights reserved.

引用

页码：388 / 393

页数：6

共 52 条

[41]

Sersale R, 1980, P 7 INT C CHEM CEM, V1

[42] COMPRESSIVE STRENGTH STUDIES ON PORTLAND-CEMENT MORTARS CONTAINING FLY-ASH AND SUPER-PLASTICIZER [J].