Flow rate measurement in aggressive conductive fluids

被引:3
作者
Dubovikova, Nataliia [1 ]
Kolesnikov, Yuri [1 ]
Karcher, Christian [1 ]
机构
[1] TU Ilmenau, RTG Lorentz Force Velocimetry & Eddy Current Test, D-98693 Ilmenau, Germany
来源
EFM13 - EXPERIMENTAL FLUID MECHANICS 2013 | 2014年 / 67卷
关键词
D O I
10.1051/epjconf/20146702022
中图分类号
O414.1 [热力学];
学科分类号
摘要
Two non-contact experimental methods of flow rate measurements for aggressive conductive liquids are described. The techniques are based on electromagnetic forces and Faraday's law: Lorentz force is induced inside moving conductive liquid under influence of variable magnetic field of permanent magnets. They are mounted along a liquid metal channel or (in case of the second method) inserted into rotated metal wheels. The force acts in the opposite of fluids' velocity direction and hence it is possible to measure reaction force of it that takes place according to Newton's law on magnetic field source - permanent magnets. And by knowing the force, which linearly depends on velocity, one can calculate mean flow rate of liquid. In addition experimental "dry" calibration and its results are described for one of the measurements' techniques.
引用
收藏
页数:5
相关论文
共 13 条
[1]  
Cukierski K., 2008, METALLURGICAL MAT B, V39
[2]  
Davidson PA., 2002, An introduction to magnetohydrodynamics
[3]   Interaction of a small permanent magnet with a liquid metal duct flow [J].
Heinicke, Christiane ;
Tympel, Saskia ;
Pulugundla, Gautam ;
Rahneberg, Ilko ;
Boeck, Thomas ;
Thess, Andre .
JOURNAL OF APPLIED PHYSICS, 2012, 112 (12)
[4]  
Jian D., 2012, MEAS SCI TECHNOL, V23, P7
[5]  
Karcher Ch., 2010, P TMS ANN M SEATTL W
[6]  
Keith Moffat H., 2000, REFLECTIONS MAGNETO
[7]  
Kolesnikov Y., 2009, SPRINGER P PHYS, V132
[8]  
Kolesnikov Y., 2011, METALLURGICAL MAT B, V42B
[9]  
Moreau R, 1990, Magnetohydrodynamics. Fluid mechanics and its applications, V3
[10]   Single-magnet rotary flowmeter for liquid metals [J].
Priede, Janis ;
Buchenau, Dominique ;
Gerbeth, Gunter .
JOURNAL OF APPLIED PHYSICS, 2011, 110 (03)