FEM machining analysis: influence of rake angle in cutting of aluminium alloys using Polycrystalline Diamond cutting tools

被引：2

作者：

Maranhao, C. ^{[1
]}

Davim, J. Paulo ^{[1
]}

Jackson, M. J. ^{[2
]}

Cabral, G. ^{[3
]}

Gracio, J. ^{[3
]}

机构：

[1] Univ Aveiro, Dept Mech Engn, P-3810193 Aveiro, Portugal

[2] Purdue Univ, Coll Technol, Ctr Adv Mfg, W Lafayette, IN 47907 USA

[3] Univ Aveiro, Dept Mech Engn, P-3810193 Aveiro, Portugal

来源：

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY | 2010年 / 37卷 / 1-2期

关键词：

FEM analysis machining; rake angle; PCD; polycrystalline diamond; aluminium alloy; RESIDUAL-STRESSES;

D O I：

10.1504/IJMPT.2010.029469

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this paper, a prediction of the then-no mechanical behaviour of the machining of an aluminium alloy is made, using a Polycrystalline Diamond (PCD) cutting tool with a variable rake angle. To aid the study, a commercial machining finite element software was used and several parameters In conclusion, from the simulations made, it was possible to predict a positive influence of the inclusion of rake angle in PCD cutting tools. A reduction of cutting forces and temperature was shown with the increase of the rake angle, allowing this way an additional extension of the tool life.

引用

页码：199 / 213

页数：15

共 12 条

[1] The influence of rake angle, cutting feed and cutting depth on residual stresses in hard turning
Dahlman, P
Gunnberg, F
Jacobson, M
[J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2004, 147 (02) : 181 - 184
[2] Finite element simulation and experimental analysis of orthogonal cutting of an aluminium alloy using Polycrystalline Diamond tools
Davim, J. Paulo
Reis, P.
Maranhao, C.
Jackson, M. J.
Cabral, G.
Gracio, J.
[J]. INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2010, 37 (1-2) : 46 - 59
[3] DAVIM JP, 2009, INT J ADV M IN PRESS
[4] Gardner Joel D., 2005, Comparative study of finite element simulation software
[5] Design and construction of a dynamometer to evaluate the influence of cutting tool rake angle on cutting forces
Gunay, Mustafa
Seker, Ulvi
Sur, Gokhan
[J]. MATERIALS & DESIGN, 2006, 27 (10): : 1097 - 1101
[6] Ikawa N., 1991, Annals of the CIRP, V40, P587, DOI DOI 10.1016/S0007-8506(07)61134-2
[7] Finite element analysis and simulation of machining: an addendum - A bibliography (1996-2002)
Mackerle, J
[J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2003, 43 (01) : 103 - 114
[8] Investigation of the effect of rake angle and approaching angle on main cutting force and tool tip temperature
Saglam, H
Unsacar, F
Yaldiz, S
[J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2006, 46 (02) : 132 - 141
[9] The influence of Johnson-Cook material constants on finite element simulation of machining of AISI 316L steel
Umbrello, D.
M'Saoubi, R.
Outeiro, J. C.
[J]. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2007, 47 (3-4) : 462 - 470
[10] Experimental study of the temperature field generated during orthogonal machining of an aluminum alloy
Vernaza-Peña, KM
Mason, JJ
Li, M
[J]. EXPERIMENTAL MECHANICS, 2002, 42 (02) : 221 - 229

← 1 2 →