Tool design and cutting parameters optimisation for plunge milling blisk

被引：7

作者：

Cheng, Yaonan ^{[1
]}

Yang, Jinlong ^{[1
]}

Zuo, Diange ^{[1
]}

Song, Xu ^{[1
]}

Feng, Xinmin ^{[1
]}

机构：

[1] Harbin Univ Sci & Technol, Key Lab Natl & Local United Engn High Efficiency, 52 Xuefu Rd, Harbin, Peoples R China

来源：

INTERNATIONAL JOURNAL OF MANUFACTURING RESEARCH | 2020年 / 15卷 / 03期

基金：

中国国家自然科学基金;

关键词：

blisk; difficult-to-machine material; plunge milling tool; cutting parameters;

D O I：

10.1504/IJMR.2020.108192

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Because of its complex structure, narrow channel, large metal removal rate and its material belonging to difficult-to-machine material, the machining of blisk is very difficult. It is one of the effective methods to solve the above problems by applying the plunge milling technology, and the tool design and cutting parameters optimisation are of great significance. Firstly, the finite element method is used to design and analyse the geometrical structure, and the static and modal analysis is carried out to ensure the strength of the tool and the stability of the plunge milling. Secondly, the experimental research on the milling titanium alloy was finished by using the designed tool, and the influence of cutting parameters on the cutting force was analysed. Finally, based on the fuzzy comprehensive evaluation method, the cutting parameters are optimised, and the rationality of the tool designed is verified through the experimental study of tool wear. [Submitted 3 January 2018; Accepted 28 December 2018]

引用

页码：266 / 284

页数：19

共 17 条

[1] FEM mesh-dependence in cutting process simulations [J].