Sintering optimisation and solution annealing of high nitrogen nickel free austenitic stainless steels prepared by PIM

被引：11
|
作者：
Cui, D. W. [1 ,2 ]
Qu, X. H. [2 ]
Guo, P. [1 ]
Li, K. [2 ]
机构：
[1] Weifang Univ, Dept Machinery, Weifang 261061, Peoples R China
[2] Univ Sci & Technol Beijing, Sch Mat Sci & Engn, Beijing 100083, Peoples R China
来源：
POWDER METALLURGY | 2010年 / 53卷 / 01期
基金：
中国国家自然科学基金;
关键词：
High nitrogen nickel free; Austenitic stainless steel; Sintering optimisation; Solution annealing; CORROSION;
D O I：
10.1179/174329008X284930
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The effects of various sintering parameters (temperature, time and nitrogen pressure) on the density, nitrogen content and the mechanical properties of high nitrogen nickel free austenitic stainless steel (0Cr-17Mn-11Mo-3N) prepared by powder injection moulding were investigated, and the influence of solution annealing on the microstructure and mechanical properties was also discussed. The results show that the optimal sintering conditions are as follows: sintering temperature 1300 degrees C, sintering time 2 h and nitrogen pressure 0.1 MPa, under which a favourable combination of the relative density of 99.1% and the nitrogen content of 0.78 wt-% can be obtained. After solution annealing at 1150 degrees C for 90 min, the yield strength and ultimate tensile strength can reach 580 and 885 MPa respectively, which are about 2.9 and 1.7 times greater than those of 316L Metal Injection Molding (MIM) stainless steel. Before solution annealing, the sintered specimens mainly consist of gamma-austenite, alpha-ferrite and network of Cr2N phase, while after solution annealing, they reveals a fully austenitic structure without any intergranular nitrides.
引用
收藏
页码：91 / 95
页数：5
相关论文
共 50 条
  • [1] A review on nickel-free nitrogen containing austenitic stainless steels for biomedical applications
    Talha, Mohd
    Behera, C. K.
    Sinha, O. P.
    MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2013, 33 (07): : 3563 - 3575
  • [2] Nickel-free high nitrogen austenitic stainless steels produced by metal injection moulding
    Uggowitzer, PJ
    Bähre, WF
    Wohlfromm, H
    Speidel, MO
    HIGH NITROGEN STEELS '98, 1999, 318-3 : 663 - 671
  • [3] Impact Toughness Properties of Nickel- and Manganese-Free High Nitrogen Austenitic Stainless Steels
    Roghayeh Mohammadzadeh
    Alireza Akbari
    Mina Mohammadzadeh
    Metallurgical and Materials Transactions A, 2016, 47 : 6032 - 6041
  • [4] Fatigue Property of Nickel-Free High Nitrogen Austenitic Stainless Steels in Simulated Body Fluid
    Maruyama, Norio
    Sanbe, Masatomo
    Katada, Yasuyuki
    Kanazawa, Kenji
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 2009, 73 (01) : 7 - 14
  • [5] Fatigue Property of Nickel-Free High-Nitrogen Austenitic Stainless Steels in Simulated Body Fluid
    Maruyama, Norio
    Sanbe, Masatomo
    Katada, Yasuyuki
    Kanazawa, Kenji
    MATERIALS TRANSACTIONS, 2009, 50 (11) : 2615 - 2622
  • [6] Nickel-free austenitic stainless steels for medical applications
    Yang, Ke
    Ren, Yibin
    SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2010, 11 (01)
  • [7] On the strengthening mechanisms of high nitrogen austenitic stainless steels
    Odnobokova, M. V.
    Belyakov, A. N.
    Dolzhenko, P. D.
    Kostina, M. V.
    Kaibyshev, R. O.
    MATERIALS LETTERS, 2023, 331
  • [8] Impact properties of high-nitrogen austenitic stainless steels
    Yuan, Zhizhong
    Dai, Qixun
    Cheng, Xiaonong
    Chen, Kangmin
    Xu, Wenwei
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 475 (1-2): : 202 - 206
  • [9] Effects of Mo on the Precipitation Behaviors in High-Nitrogen Austenitic Stainless Steels
    Shi, Feng
    Qi, Yang
    Liu, Chunming
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2011, 27 (12) : 1125 - 1130
  • [10] Progress on welding of high nitrogen alloyed austenitic stainless steels
    Holmberg B.
    Welding in the World, 2002, 46 (1-2) : 3 - 9
12345