Pressure drop during air flow in aluminum foams

被引:152
作者
Mancin, Simone [1 ]
Zilio, Claudio [1 ]
Cavallini, Alberto [1 ]
Rossetto, Luisa [1 ]
机构
[1] Univ Padua, Dipartimento Fis Tecn, I-35131 Padua, Italy
关键词
Air flow; Foam; Pressure drop; EFFECTIVE THERMAL-CONDUCTIVITY; METAL FOAMS; HEAT-EXCHANGERS; CERAMIC FOAMS; MASS-TRANSFER; POROUS-MEDIA; PERMEABILITY; MATRICES; FLUID;
D O I
10.1016/j.ijheatmasstransfer.2010.03.015
中图分类号
O414.1 [热力学];
学科分类号
摘要
This paper aims at investigating experimentally the pressure drop during air flow in six different aluminum open-cell foam samples with different number of pores per inch (PPI) and different porosity under a wide range of air mass flow rate. Three imposed heat fluxes are considered for each foam sample. The collected pressure drop data are analysed with reference to models available in the literature. A new simple pressure drop model, based on present data, has then been developed. The consistency of the proposed model is finally checked by comparison to data available in the literature from different laboratories. (C) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码:3121 / 3130
页数:10
相关论文
共 37 条
[11]   The effects of compression and pore size variations on the liquid flow characteristics in metal foams [J].
Boomsma, K ;
Poulikakos, D .
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2002, 124 (01) :263-272
[12]   On the effective thermal conductivity of a three-dimensionally structured fluid-saturated metal foam [J].
Boomsma, K ;
Poulikakos, D .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2001, 44 (04) :827-836
[13]  
Crosnier S, 2003, 1 EUR HYDR EN C SEPT, P1
[14]   Correlations for the pressure drop for flow through metal foam [J].
Dukhan, N. .
EXPERIMENTS IN FLUIDS, 2006, 41 (04) :665-672
[15]   Equivalent particle diameter and length scale for pressure drop in porous metals [J].
Dukhan, Nihad ;
Patel, Pragnesh .
EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2008, 32 (05) :1059-1067
[16]  
DUPLESSIS JP, 1994, CHEM ENG SCI, V49, P3545, DOI DOI 10.1016/0009-2509(94)00170-7
[17]   Pressure drop modeling on SOLID foam: State-of-the art correlation [J].
Edouard, David ;
Lacroix, Maxime ;
Huu, Cuong Pham ;
Luck, Francis .
CHEMICAL ENGINEERING JOURNAL, 2008, 144 (02) :299-311
[18]  
Fourie JG, 2002, CHEM ENG SCI, V57, P2781
[19]   Mass transfer and pressure drop in ceramic foams: A description for different pore sizes and porosities [J].
Garrido, G. Incera ;
Patcas, F. C. ;
Lang, S. ;
Kraushaar-Czarnetzki, B. .
CHEMICAL ENGINEERING SCIENCE, 2008, 63 (21) :5202-5217
[20]  
GIBSON LJ, 1997, CAMBRIDGE SOLIDE STA