Microfluidic solvent extraction of rare earth elements from a mixed oxide concentrate leach solution using Cyanex® 572

Solvent extraction of rare earth elements (REEs) involves hundreds of individual extraction and phase separation cycles, fine adjustment of solution conditions, and individual stage and overall process times that are long. Therefore, we investigated microfluidic solvent extraction (microSX) of REEs from a leached mixed rare earth oxide (REO) mineral concentrate using a phosphorus-based cationic exchange extractant (Cyanex (R) 572). A Y-Y microchip was used, in which the aqueous and organic phases were contacted for up to 15 s with sub-second resolution. The extraction rate and selectivity for heavy REEs was determined for the prepared leach solution. Good selectivity for heavy REEs was observed using the microchip for leach solutions adjusted to pH 0.7. Extraction rates on the microchip were typically double that observed in conventional (bulk) solvent extractions, except for Lu and Yb, which were three-times faster. The faster extraction can be largely attributed to the higher surface-to-volume ratio achieved in our microfluidic experiments; double that observed for bulk extractions under the conditions employed. (C) 2016 Elsevier Ltd. All rights reserved.