Ca2CuO3: A high temperature CO2 sorbent with rapid regeneration kinetics

被引：10

作者：

Hassani, Ehsan ^{[1
]}

Cho, Jinwon ^{[2
]}

Feyzbar-Khalkhali-Nejad, Farshad ^{[1
]}

Rashti, Ali ^{[3
]}

Jang, Seung Soon ^{[2
]}

Oh, Tae-Sik ^{[1
]}

机构：

[1] Auburn Univ, Dept Chem Engn, Auburn, AL 36849 USA

[2] Sch Mat Sci & Engn, Georgia Inst Technol, Atlanta, GA 30332 USA

[3] Univ Delaware, Dept Mech Engn, Newark, DE 19716 USA

来源：

JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING | 2022年 / 10卷 / 02期

关键词：

CO2; capture; CaO-based sorbent; Inversion temperature; Temperature programmed carbonation; Temperature swing; CAO-BASED SORBENTS; HYDROGEN-PRODUCTION; LOOPING PROCESS; PORE-SIZE; CALCIUM; CAPTURE; PERFORMANCE; GASIFICATION; PRESSURE; CATALYST;

D O I：

10.1016/j.jece.2022.107334

中图分类号：

X [环境科学、安全科学];

学科分类号：

08 ; 0830 ;

摘要：

Three different calcium-based ternary oxide sorbents, Ca2CuO3, Ca3Co4O9, and Ca2Fe2O5, were characterized as potential sorbents for CO2 capture. The behaviors of these sorbents were compared to CaO under various CO2 concentrations via temperature programmed carbonation/decarbonation. Ca2CuO3 and Ca3Co4O9 showed lower inversion temperatures, while Ca2Fe2O5 had a higher inversion temperature than CaO. In addition, the copper and cobalt containing sorbents showed relatively narrower temperature windows going from the highest carbonation rate to the highest decarbonation rate. This narrow temperature window can be advantageous in operating a temperature swing process. Ca3Co4O9 and Ca2Fe2O5 showed low conversion. Under the best-case scenario, the conversion of these sorbents was less than 25%. Ca2CuO3 showed faster regeneration compared to CaO when the sorbent temperature was cycled between 700 and 800 degrees C. In addition, we found 740-850 degrees C for Ca2CuO3 and 640-900 degrees C for CaO as the temperature swing windows of the best reaction rates. The narrower range of operational temperature (110 degrees C for Ca2CuO3 compared to 260 degrees C for CaO) can lead to higher overall rate of CO2 uptake and release. Ca2CuO3 showed 60% higher cycle-averaged decarbonation rate compared to CaO when cycled between the temperatures of maximum carbonation and decarbonation rates

引用

页数：10

共 56 条

[1] Development of a Fe/Mg-bearing metallurgical waste stabilized-CaO/NiO hybrid sorbent-catalyst for high purity H2 production through sorption-enhanced glycerol steam reforming [J].