Formation Mechanisms and Microstructure Characterization of Al/Al3Ni In-situ Composite by Compound Casting

被引：9

作者：

Sistaninia, M. ^{[1
]}

Doostmohammadi, H. ^{[1
]}

Raiszadeh, R. ^{[1
]}

机构：

[1] Shahid Bahonar Univ Kerman, Dept Met & Mat Sci, Sch Engn, Jomhoori Eslami Blvd, Kerman, Iran

来源：

METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE | 2019年 / 50卷 / 06期

关键词：

17;

D O I：

10.1007/s11663-019-01682-1

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The Compound casting method was used to produce an Al/Ni bimetal composite. The mechanisms of formation of the reinforcing intermetallic phases were studied and the produced bimetal composite's microstructure was then characterized. The results showed that the Al/Ni interface consisted of two intermetallic layers including Al3Ni2 and Al3Ni. It is suggested that the Al3Ni reinforcing particles of the composite originated from two sources. (1) Some Al3Ni particles detached from the Al3Ni layer formed at the interface between the Ni core and the Al melt and dispersed in the liquid Al and (2) Al-Al3Ni eutectic phase, which formed during the solidification process. The increase in the temperature led to the formation of more reinforcing particles and extended the depth of dispersion of the particles in the Al matrix. (C) The Minerals, Metals & Materials Society and ASM International 2019

引用

页码：3020 / 3026

页数：7

共 50 条

[1] Formation Mechanisms and Microstructure Characterization of Al/Al3Ni In-situ Composite by Compound Casting
M. Sistaninia
H. Doostmohammadi
R. Raiszadeh
Metallurgical and Materials Transactions B, 2019, 50 : 3020 - 3026
[2] Microstructure and mechanical behavior of the Al/Al3Ni eutectic composite
Buzatu, M.
Popescu, Gabriela
Zsigmond, Mariana
Buzatu, Rodica
UPB Scientific Bulletin, Series B: Chemistry and Materials Science, 60 (03): : 167 - 175
[3] In-situ Al/Al3Ni functionally graded materials by electromagnetic separation method
Song, Chang-Jiang
Xu, Zhen-Ming
Li, Jian-Guo
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 445 : 148 - 154
[4] Fabrication of Al3Ni-Al2O3-Al in-situ composite by direct reaction squeeze casting
Peng, Huaxin
Wang, Dezun
Geng, Lin
Yao, Zhongkai
Cai Liao Ke Xue Yu Gong/Material Science and Technology, 1996, 4 (03): : 11 - 16
[5] Processing effects on the characteristics of the in-situ formed Al3Ni reinforcement in a PM Al matrix
Marcelo, T
Carvalho, MH
ADVANCED MATERIALS FORUM II, 2004, 455-456 : 258 - 261
[6] In-situ formation of Al3Ni nano particles in synthesis of Al 7075 alloy by friction stir processing with Ni powder addition?
Zhang, Suhong
Li, Yuan
Frederick, Alan
Wang, Yanli
Wang, Yiyu
Allard Jr, Lawrence
Koehler, Michael
Shin, Seungha
Hu, Anming
Feng, Zhili
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2023, 311
[7] A Novel In Situ (Al3Ni + Al3Ti)/Al Composite Inoculant and Its Effects on the Microstructure, Damping and Mechanical Properties of Zn–Al Eutectoid Alloy
Jianjun Zhang
Fuxing Yin
Binan Jiang
Qingzhou Wang
Hui Yu
Zhixian Jiao
Li Liu
Puguang Ji
Yafei Liu
Metallurgical and Materials Transactions A, 2022, 53 : 2099 - 2115
[8] Dry sliding wear characteristics of in-situ hybrid (Al3Ni + Al2O3)-Al composites
Yu, Xiaojie
Xue, Jing
Yao, Mingxiao
Su, Fei
Yang, Jin
Huang, Haijun
Gong, Jianbao
MATERIALS SCIENCE AND TECHNOLOGY, 2024, 40 (06) : 427 - 440
[9] Dry sliding wear characteristics of in-situ hybrid (Al3Ni + Al2O3)–Al composites
Yu, Xiaojie
Xue, Jing
Yao, Mingxiao
Su, Fei
Yang, Jin
Huang, Haijun
Gong, Jianbao
Materials Science and Technology (United Kingdom), 2024, 40 (06): : 427 - 440
[10] In-Situ Observation on the Diversified Morphology and Growth Behavior of Al3Ni Phase at the Liquid Al/Solid Ni Interface
Ding, Zongye
Hu, Qiaodan
Lu, Wenquan
Sun, Siyu
Xia, Mingxu
Li, Jianguo
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018, 49A (05): : 1486 - 1491

← 1 2 3 4 5 →