IMPACT OF SILVICULTURAL MEASURES ON THE QUALITY OF SCOTS PINE WOOD PART II. EFFECT OF SITE

被引:0
作者
Schonfelder, Ondrej [1 ]
Zeidler, Ales [1 ]
Boruvka, Vlastimil [1 ]
Bilek, Lukas [2 ]
机构
[1] Czech Univ Life Sci Prague, Fac Forestry & Wood Sci, Dept Wood Proc & Biomat, Kamycka 129, Prague 16500 6, Czech Republic
[2] Czech Univ Life Sci Prague, Fac Forestry & Wood Sci, Dept Silviculture, Kamycka 129, Prague 16500 6, Czech Republic
关键词
Scots pine; wood; mechanical and physical properties; site; vertical variability; SYLVESTRIS L; DENSITY; SPRUCE; TIMBER; MODELS;
D O I
暂无
中图分类号
TB3 [工程材料学]; TS [轻工业、手工业、生活服务业];
学科分类号
0805 ; 080502 ; 0822 ;
摘要
This study deals with the variability of wood density, compression strength and the impact bending strength within the trunk of Scots pine (Pinus sylvestris L.). The impact of the site on the examined properties was also evaluated. The tree samplers come from four different sites that are representative for Scots pine growth in the Czech Republic. From the samplers the sections representing a basal part of the trunk and a middle part of the tree were cut. The most significant influence of the site was confirmed for wood density; on the other hand, the influence of the site is ambiguous in terms of the examined strength characteristics. A decrease in the wood properties with increasing trunk height was proven for all tested properties. The highest impact of the position was observed for wood density, while the results of vertical variability in mechanical properties are not always significant (compression strength: basal 47.1 MPa and middle 45.8 MPa). A dose correlation between mechanical properties and wood density was also proven.
引用
收藏
页码:789 / 798
页数:10
相关论文
共 50 条
  • [31] The Effect of Altitude Difference on Physical and Mechanical Properties of Scots Pine Wood Grown in Turkey - Sinop Province
    Kaygin, Bulent
    Esnaf, Semih
    Aydemir, Deniz
    DRVNA INDUSTRIJA, 2016, 67 (04) : 393 - 397
  • [32] Effect of silvicultural management on wood quality and timber utilisation of Cedrus atlantica in the European mediterranean area
    F. Hapla
    J. V. Oliver-Villanueva
    J. M. González-Molina
    Holz als Roh- und Werkstoff, 2000, 58 : 1 - 8
  • [33] Evaluation of wood quality by wavelet analysis II. Estimation of knot size
    Kodama, Y
    Zhang, Z
    Kawabata, H
    MOKUZAI GAKKAISHI, 2001, 47 (06): : 473 - 478
  • [34] EFFECT OF SITE CHARACTERISTICS ON JUVENILE WOOD TRANSITION IN LODGEPOLE PINE IN THE INLAND NORTHWEST
    Gorman, Thomas M.
    Kretschmann, David E.
    Green, David W.
    Wiemann, Michael C.
    WOOD AND FIBER SCIENCE, 2018, 50 (02): : 180 - 192
  • [35] Quality of Scots pine wood on the lands reclaimed for forestry - spoil heap after the exploitation of sulphur in Piaseczno case study
    Pajak, Marek
    Michalec, Krzysztof
    Wasik, Radoslaw
    Koscielny, Michal
    SYLWAN, 2016, 160 (04): : 284 - 291
  • [36] The efect of site quality and biological tree class on the crown productivity in Scots pine (Pinus sylvestris L.)
    Jelonek, Tomasz
    Pazdrowski, Witold
    Arasimowicz, Magdalena
    Tomczak, Arkadiusz
    Szaban, Jaroslaw
    SYLWAN, 2009, 153 (05): : 304 - 320
  • [37] Cupping behaviour of surface densified Scots pine wood: the effect of process parameters and correlation with density profile characteristics
    Belt, Tiina
    Rautkari, Lauri
    Laine, Kristiina
    Hill, Callum A. S.
    JOURNAL OF MATERIALS SCIENCE, 2013, 48 (18) : 6426 - 6430
  • [38] The Effect of Spiral Grain on Energy Requirement of Plane Milling of Scots Pine (Pinus sylvestris L.) Wood
    Pinkowski, Grzegorz
    Krauss, Andrzej
    Sydor, Maciej
    BIORESOURCES, 2016, 11 (04): : 9302 - 9310
  • [39] The effect of service age on various chemical properties of Scots pine and Crimean juniper wood used indoor constructions
    Tutus, A
    Alma, MH
    Bektas, I
    WOOD RESEARCH, 2004, 49 (04): : 25 - 31
  • [40] The effect of 120 years of service on various physical and mechanical properties of Scots pine wood used as roof beam
    Bektas, I
    Alma, MH
    As, N
    WOOD RESEARCH, 2005, 50 (01): : 27 - 32