Pulsed channel flow in Bhutan

We summarize our results from Bhutan and interpret the Greater Himalaya Sequence (GHS) of Bhutan, together with a portion of the underlying Lesser Himalaya Sequence, in the context of recently published channel flow models. For the GHS rocks now exposed in Bhutan the depth for beginning of muscovite dehydration melting (approximately 750 degrees C at 11 kbar) and associated weakening of these rocks is constrained by geobarometry to be at about 35-45 km. The location of initial melting was down-dip and over 200 km to the north of Bhutan. Melt was produced and injected into ductilely deforming metamorphic rocks as they were extruded towards the south between the Main Central Thrust (MCT) and the South Tibetan Detachment zones. The lateral flow of low viscosity rocks at these depths occurred under southern Tibet between 22 Ma and 16 Ma. Subsequently, the channel rocks decompressed from 11 to 5 kbar (from 35 km to a depth of 15 km), but maintained high temperatures, between about 16 Ma and 13 Ma. The data from Bhutan are consistent with channel flow models if there were several pulses of channel flow. The first, between 22 and 16 Ma, produced the rock seen in the lower half of the GHS of Bhutan. A second pulse, which is cryptic, is inferred to have led to the uplift and exhumation of the MCT zone. A third, in central Bhutan, is exposed now as the hanging wall of the Kakhtang thrust, an out-of-sequence thrust that was active at 12-10 Ma. The latter two pulses likely broke around a plug at the head of the first pulse that was formed where the melt in the channel had solidified.