Atom probe tomography study of an Fe25Ni25Co25Ti15Al10 high-entropy alloy fabricated by powder metallurgy

In this study, transmission electron microscopy (TEM) and atom probe tomography (APT) were utilized to investigate the microstructure and phases in an Fe25Ni25Co25Ti15Al10 high-entropy alloy (HEA) prepared by mechanical alloying (MA) and spark plasma sintering (SPS). The bulk Fe25Ni25Co25Ti15Al10 HEA was characterized by a high tensile strength of 2.52 GPa and contained a minor bcc phase (similar to 17.7 vol%), together with a primary fcc phase (similar to 82.3 vol%) containing hierarchical nanoprecipitates. The bcc phase was a 82-type NiAI phase that contained substantial amounts of Co, Ti and Fe; it also exhibited Fe and Co rich nanoprecipitates with an average diameter of 1.11 +/- 0.33 nm. The fcc phase consisted of a gamma Fe-(Co,Ni)-based solid-solution matrix (A1), and coherent primary gamma' (Ni,Co)(3)-(Ti,Al)-based intermetallic precipitates (L1(2)). Al structured secondary y* precipitates were found coherently embedded in the L12 gamma-' precipitates. We propose that the formation of the secondary gamma* precipitates was largely driven by the unique chemical composition of the gamma' precipitates which accommodate substantial amounts of Fe, Al and Ti, coupled with the nonequilibrium processing route used in our studies. Surprisingly, a novel type of Al-Ti-O oxide was identified via APT. A Ti(C,N) compound containing similar to 9.19 at.% N and similar to 12.27 at.% Ni was also detected by APT, rather than a simple TiC. Our analysis suggests that the Al-Ti-O oxide likely formed during MA, whereas the Ti(C,N) phase formed during sintering. In addition, a CALPHAD (Calculation of Phase Diagrams) approach was utilized to assist in understanding the underlying phase formation mechanisms. The notable high strength of 2.52 GPa in the Fe(25)N(i2)5Co(25)Ti(15)Al(10) HEA support the hypothesis that phase formation mechanisms play an important role in the mechanical performance of HEA5 fabricated by powder metallurgy. (C) 2019 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.